The ice fishing WY board is sponsored by:

Author Topic: Casper - Sharpen Blades  (Read 471 times)

Offline WyoIceFisher

  • IceShanty Rookie
  • **
  • Posts: 17
Casper - Sharpen Blades
« on: Feb 11, 2021, 07:44 PM »
Hey Guys,

I was wondering if anyone knew of anyone that was actually good at sharpening Eskimo shaver blades. I have a 10 inch auger and pathfinder's sandy ice has been a little hard on them. I was looking for some info on someone trustworthy that might be able to sharpen them and what it might cost me. Sounds like there might be a guy or two around town in Casper, WY from some of the guys I talked to while fishing out at the lake. However, they couldn't remember exactly where or who, etc....

Let me know if anyone has a name and number or any other information.

Offline glenwyo

  • Team IceShanty Addict
  • *
  • Posts: 936
Re: Casper - Sharpen Blades
« Reply #1 on: Feb 11, 2021, 11:53 PM »
Hey Guys,

I was wondering if anyone knew of anyone that was actually good at sharpening Eskimo shaver blades. I have a 10 inch auger and pathfinder's sandy ice has been a little hard on them. I was looking for some info on someone trustworthy that might be able to sharpen them and what it might cost me. Sounds like there might be a guy or two around town in Casper, WY from some of the guys I talked to while fishing out at the lake. However, they couldn't remember exactly where or who, etc....

Let me know if anyone has a name and number or any other information.
Saw this posted under Wyoming Bait Shops, News, etc: AUGER/BLADE REPAIR/SHARPENING
Kinkyline--307-253-8818 (Casper)

Offline WyoIceFisher

  • IceShanty Rookie
  • **
  • Posts: 17
Re: Casper - Sharpen Blades
« Reply #2 on: Feb 12, 2021, 12:16 AM »
Thanks. I am not use to ice shanty and the forums/posts. This guy is out of Casper?

Offline Dorado

  • Team IceShanty Addict
  • *
  • Posts: 675
Re: Casper - Sharpen Blades
« Reply #3 on: Feb 12, 2021, 11:44 AM »
Hey Guys,

I was wondering if anyone knew of anyone that was actually good at sharpening Eskimo shaver blades. I have a 10 inch auger and pathfinder's sandy ice has been a little hard on them. I was looking for some info on someone trustworthy that might be able to sharpen them and what it might cost me. Sounds like there might be a guy or two around town in Casper, WY from some of the guys I talked to while fishing out at the lake. However, they couldn't remember exactly where or who, etc....

Let me know if anyone has a name and number or any other information.

You might also try one of those carbide sharpeners.  I have used one on my Eskimo blades to touch them up, and they do work.  Not as sharp as new blades, but pretty good...

This is similar to the one I have.

https://www.amazon.com/Sharp-007-AugerSharp-Auger-Sharpener/dp/B0027VRU6C/ref=asc_df_B0027VRU6C/?tag=hyprod-20&linkCode=df0&hvadid=167145808484&hvpos=&hvnetw=g&hvrand=15576218083915973985&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9029371&hvtargid=pla-273450792362&psc=1

Offline WyoIceFisher

  • IceShanty Rookie
  • **
  • Posts: 17
Re: Casper - Sharpen Blades
« Reply #4 on: Feb 12, 2021, 06:12 PM »
Thanks guys!

Offline ten bears

  • IceShanty Rookie
  • **
  • Posts: 17
Re: Casper - Sharpen Blades
« Reply #5 on: Feb 13, 2021, 03:03 PM »
Good old file works just taking the burs and nicks out donít need to be sharp like a knife more of a chisel lots YouTube videos out there

Offline Kinkyline

  • Team IceShanty Addict
  • *
  • Posts: 720
  • How sweet they are!
Re: Casper - Sharpen Blades
« Reply #6 on: Feb 13, 2021, 06:24 PM »
Good old file works just taking the burs and nicks out donít need to be sharp like a knife more of a chisel lots YouTube videos out there
  A file will screw up shaver blades and change the angle of the blade. You might do ok on a set of Jiffy ripper blades with a file, provided it's a very fine cut file.

 



Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.