IceShanty.com's Ice Fishing Community
Massachusetts => Ice Fishing Massachusetts => Topic started by: MrE1979 on Nov 23, 2015, 02:34 PM
-
So found the link to the Rigid warranty on another thread. This paragraph voids out how AWESOME Rigid is.
What is Not Covered
Failures due to misuse, abuse or normal wear and tear are not covered by this warranty. Ridge Tool shall not be responsible for any incidental or consequential damages.
Here is the rest of the "Lifetime warranty". Kinda reminds me of your boots. Rigid decides the "Lifetime"
https://www.ridgid.com/us/en/full-lifetime-warranty (https://www.ridgid.com/us/en/full-lifetime-warranty)
-
I had a dream...went down to my favorite piece of ice and everyone was using a hand blender with auger attachment! Meanwhile on shanty a debate raged on about whos blender had the best warranty!
-
John my new drill setup. At the price the lack of warranty means nothing.
(http://ecx.images-amazon.com/images/I/318RX7ds9AL.jpg)
-
Ed you're never gonna get a trophy pike through a 5/8" hole!
-
Pfff 5/8" hole. Gonna hook it up to a 6" nills auger.
-
Stop the presses. Wait,wait wait, Ed our Ed is gonna get out and ice fish this year. Sweet jesus I only hope I get to spend some time on ice with you.
Flags up!
Ctown
-
Stop the presses. Wait,wait wait, Ed our Ed is gonna get out and ice fish this year. Sweet jesus I only hope I get to spend some time on ice with you.
Flags up!
Ctown
Yeah buddy. Vertigo is under control. Gonna ice fish as much as possible. Gotta make up for last year.
-
Yeah buddy. Vertigo is under control. Gonna ice fish as much as possible. Gotta make up for last year.
I thought you were dedicating your ice season to that craft you bought? You can't be buying fancy drill augers if you own a boat!!!
-
So found the link to the Rigid warranty on another thread. This paragraph voids out how AWESOME Rigid is.
Here is the rest of the "Lifetime warranty". Kinda reminds me of your boots. Rigid decides the "Lifetime"
https://www.ridgid.com/us/en/full-lifetime-warranty (https://www.ridgid.com/us/en/full-lifetime-warranty)
Seems Rigid stands behind their products better than Milwaukee tho. Have been several reports of guys getting their rigids fixed without issue. While Milwaukee owners are finding out wear and tear isnt covered, and Milwaukee gets to dictate what that is and has been charging people for repairs..
http://www.iceshanty.com/ice_fishing/index.php?topic=320072.0 (http://www.iceshanty.com/ice_fishing/index.php?topic=320072.0)
Untill it happens to me Im not going to worry to much about it. Knowing i have the option for a lifetime is better IMO.
-
yep!
http://www.iceshanty.com/ice_fishing/index.php?topic=320072.0
-
I thought you were dedicating your ice season to that craft you bought? You can't be buying fancy drill augers if you own a boat!!!
Isn't it an oxymoron to dedicate an ice season to a soft water boat. Kinda like Frozen Hot chocolate.
Fancy drills get a write off at the end of the year. Can't do my job without the tools to do it. Now if I could only justify an auger as an electrical tool.
-
You guys use those drills in speed 1? (Low gear)
I burn up drill clutches left and right, and I m only drilling metal studs up to 2 1/2" tops, and not the heavy gauge ones. If I lay into it too much, it overheard and shuts down for a few minutes. I use speed 2 just so I don't tear up a wrist, maybe I'm doing that wrong. I got to see one of the drill setups in person, and how well it can handle the task.
-
You guys use those drills in speed 1? (Low gear)
I burn up drill clutches left and right, and I m only drilling metal studs up to 2 1/2" tops, and not the heavy gauge ones. If I lay into it too much, it overheard and shuts down for a few minutes. I use speed 2 just so I don't tear up a wrist, maybe I'm doing that wrong. I got to see one of the drill setups in person, and how well it can handle the task.
Over 1000 holes thru 18" of ice using a 6" auger over the past two seasons. No issues yet.
-
I think I'm done carrying around those super powerful, reliable, strong torque power augers (propane or gas) Even though my first one lasted over 15 years cutting 10's of thousands of holes (9"). Does anyone know where I can get an attachment for my new "Hercules powered" drill, ( 9" auger blade)
(http://i1213.photobucket.com/albums/cc475/millburyman/Screenshot_2015-11-24-11-49-17-1_zpscnlspydn.png) (http://s1213.photobucket.com/user/millburyman/media/Screenshot_2015-11-24-11-49-17-1_zpscnlspydn.png.html)
-
wow, is that a 1/2" chuck!
-
wow, is that a 1/2" chuck!
lol not sure 😎
-
I think I'm done carrying around those super powerful, reliable, strong torque power augers (propane or gas) Even though my first one lasted over 15 years cutting 10's of thousands of holes (9").
10's of thousands of holes equates to roughly 8-10 holes per trip if you fished every day starting in Dec till the end of March, without missing a day, for 15yrs.
Thats alot of fishing good sir. :P
-
:laugh: :laugh: :laugh: :laugh:
I had a dream...went down to my favorite piece of ice and everyone was using a hand blender with auger attachment! Meanwhile on shanty a debate raged on about whos blender had the best warranty!
-
I think I'm done carrying around those super powerful, reliable, strong torque power augers (propane or gas) Even though my first one lasted over 15 years cutting 10's of thousands of holes (9"). Does anyone know where I can get an attachment for my new "Hercules powered" drill, ( 9" auger blade)
Keith if you bring that out I will have an adapter made for you!! My only question is how is the warranty on that drill? Hope its a lifetime one cause I think you are WELL past the 90 day store return.
10's of thousands of holes equates to roughly 8-10 holes per trip if you fished every day starting in Dec till the end of March, without missing a day, for 15yrs.
Thats alot of fishing good sir. :P
Ummmm you ever see how much he fishes? I wouldn't doubt it. I would only doubt it if he had said hundreds of thousands of holes.
-
:laugh: :laugh: :laugh: :laugh:
Gotta keep it light around these parts ron. I don't want anyone to ruin their lace over one of my posts.
-
10's of thousands of holes equates to roughly 8-10 holes per trip if you fished every day starting in Dec till the end of March, without missing a day, for 15yrs.
Thats alot of fishing good sir. :P
I know you like formulas & statistics. I'll do my best to shed light on the matter. Note that these figures are approximate. I can't remember every season by heart.
If I go by how some seasons have run in the past. Half of December, all of Jan, Feb, March, half of April. This is every weekend and estimating 2 days during the week (some years more than 2 weekdays) . That's 48 days per season (sometimes more). After speaking to the wife, she told me the auger was 17 years old, not 15 (same age as my daughter). So we take 48 days at usually 15 holes per day, that's 720 holes per season. Now multiply that by 17years, its 12,240 holes. Now for the fun part, My friend Rich doesn't own an auger and only fishes when I go. Let's say he fished half the amount I did, that's another 6,120 holes in 17 years. Total being 18,360 holes! Let's break it down a little bit. If I only cut 10 holes per day, that's 8,160 + Rich 4,080 total being 12,240 holes. So I'll stick to my original estimate of 10's of thousands. 👍👍🍻🎣😎 P.S , I forgot to tally in all the holes for other friends and strangers that I've cut holes for. Add 25-50 holes per year for a good estimate.
-
I know you like formulas & statistics. I'll do my best to shed light on the matter. Note that these figures are approximate. I can't remember every season by heart.
If I go by how some seasons have run in the past. Half of December, all of Jan, Feb, March, half of April. This is every weekend and estimating 2 days during the week (some years more than 2 weekdays) . That's 48 days per season (sometimes more). After speaking to the wife, she told me the auger was 17 years old, not 15 (same age as my daughter). So we take 48 days at usually 15 holes per day, that's 720 holes per season. Now multiply that by 17years, its 12,240 holes. Now for the fun part, My friend Rich doesn't own an auger and only fishes when I go. Let's say he fished half the amount I did, that's another 6,120 holes in 17 years. Total being 18,360 holes! Let's break it down a little bit. If I only cut 10 holes per day, that's 8,160 + Rich 4,080 total being 12,240 holes. So I'll stick to my original estimate of 10's of thousands. 👍👍🍻🎣😎 P.S , I forgot to tally in all the holes for other friends and strangers that I've cut holes for. Add 25-50 holes per year for a good estimate.
This is assuming every hole you cut is with your auger. As we all know your preferred method of hole making is with your Super Spud. In the dozen or so times ive fished with you, i dont recall you ever using an auger. This includes the time at the cove when u chopped thru 18" of ice lol.
If u use your spud for say 2/3 of the season (early/late ice), thats roughly 16 trips per year for the auger. Say you average 200 holes in those 16 trips (8 trips 10 holes, 8 trips 15 holes) over a 17 year span you get 17*200 = 3400. We can add in your buddies 4000 holes, putting you at around 7500.
-
I think I'm done carrying around those super powerful, reliable, strong torque power augers (propane or gas) Even though my first one lasted over 15 years cutting 10's of thousands of holes (9"). Does anyone know where I can get an attachment for my new "Hercules powered" drill, ( 9" auger blade)
(http://i1213.photobucket.com/albums/cc475/millburyman/Screenshot_2015-11-24-11-49-17-1_zpscnlspydn.png) (http://s1213.photobucket.com/user/millburyman/media/Screenshot_2015-11-24-11-49-17-1_zpscnlspydn.png.html)
. Keith...... Thats Awesome!!!!
-
THE number of holes I'm thinking is 50.............For that rig.......ILL take the under.
-
I think I'm done carrying around those super powerful, reliable, strong torque power augers (propane or gas) Even though my first one lasted over 15 years cutting 10's of thousands of holes (9"). Does anyone know where I can get an attachment for my new "Hercules powered" drill, ( 9" auger blade)
(http://i1213.photobucket.com/albums/cc475/millburyman/Screenshot_2015-11-24-11-49-17-1_zpscnlspydn.png) (http://s1213.photobucket.com/user/millburyman/media/Screenshot_2015-11-24-11-49-17-1_zpscnlspydn.png.html)
I can't believe you would fall for the marketing on that tool. I would think a guy like you would know better than to buy such junk MM :nono: Rigorous and exhaustive key board research has taught me that the enclosed case and flimsy construction leads to continual fouling. And lord forbid you have a problem with the unit because customer support just claims user error and the replacement policy is a joke. IF you insist on using the egg beater style then you should go with the open face that will allow you to clear the ice and replace any component that may fail. This is the brand I would recommend for a wheel style.
(http://i8.photobucket.com/albums/a42/CaptShay/post-handdrill_zpsvlpsbiyb.jpg) (http://s8.photobucket.com/user/CaptShay/media/post-handdrill_zpsvlpsbiyb.jpg.html)
This is the style I use and frankly, your a fool and have no idea what you are talking about if you use anything else and I can and will argue the point endlessly on the internets about it. Speed and dependability are the key with the push pull system. They are 20% percent faster and much more dependable than egg beaters and any one who thinks otherwise is a complete unadulterated fool who isn't smart enough to come in out of the rain.
(http://i8.photobucket.com/albums/a42/CaptShay/mcxz3jm_zpsikuwpc1y.jpg) (http://s8.photobucket.com/user/CaptShay/media/mcxz3jm_zpsikuwpc1y.jpg.html)
This company stands behind their product, not like those fools at the egg beater companies. The best deal on them right now can be found here [link]
For early ice I use a simple brace. No gears to freeze, simple and sleek and you can check the ice with them.
(http://i8.photobucket.com/albums/a42/CaptShay/mcxz4t2_zpspx9hvrf3.jpg) (http://s8.photobucket.com/user/CaptShay/media/mcxz4t2_zpspx9hvrf3.jpg.html)
-
Me and capt are on the same page here lol
-
That's awesome! That was a screenshot of an old hand drill if you were ignorant enough to think I actually owned a hand drill. That's just as insane as using a battery drill for cutting holes in ice. Will the 2 times we fished together was 1 at the cove where I didn't want to drag the auger over a dirt road with no snow and only had to chop through 8" of ice. The 2nd time was after a blizzard with 2+ feet of snow, again on relatively thin ice. You can do all the math you want, I'm closer to my estimate than you are. And my propane or my gas will last considerably longer than your "huffy" rigid piece of manure. If you would like to continue this ridiculous conversation, you know I'll be happy to oblige. But you might have other posts to nit pic about ? Perhaps the definition and differences between a spud & a chisel? Or maybe how "any size" fish will through a 6" hole! So have at it, I'll check back when I'm bored and need a good laugh!
-
Whoa good sir, here i thought this was a post that was about auger ball busting
-
Perfect post Capt.!
-
Whoa good sir, here i thought this was a post that was about auger ball busting
Noooo ORIGONALY it was a thread bustin your balls about the rigid "Lifetime" warranty. Reminds me of a "Lifetime Warranty" issue you had once.
-
WAIT I FOUND IT!!!!! There we go ;D
http://www.iceshanty.com/ice_fishing/index.php?topic=261793.msg2690171#msg2690171 (http://www.iceshanty.com/ice_fishing/index.php?topic=261793.msg2690171#msg2690171)
-
WAIT I FOUND IT!!!!! There we go ;D
http://www.iceshanty.com/ice_fishing/index.php?topic=261793.msg2690171#msg2690171 (http://www.iceshanty.com/ice_fishing/index.php?topic=261793.msg2690171#msg2690171)
Thats Cabellas, whats that have to do with Rigid?
-
Thats Cabellas, whats that have to do with Rigid?
What was your complaint about Cabellas? I believe it had something to do with a Warranty and the "Lifetime" of said item......
Might I take a quote from Tommy Boy.
Tommy: Let's think about this for a sec, Ted. Why would somebody put a guarantee on a box? Hmmm, very interesting.
Ted Nelson, Customer: Go on, I'm listening.
Tommy: Here's the way I see it, Ted. Guy puts a fancy guarantee on a box 'cause he wants you to feel all warm and toasty inside.
Ted Nelson, Customer: Yeah, makes a man feel good.
Tommy: 'Course it does. Why shouldn't it? Ya figure you put that little box under your pillow at night, the Guarantee Fairy might come by and leave a quarter, am I right, Ted?
[chuckles until he sees that Ted is not laughing]
Ted Nelson, Customer: [impatiently] What's your point?
Tommy: The point is, how do you know the fairy isn't a crazy glue sniffer? "Building model airplanes" says the little fairy; well, we're not buying it. He sneaks into your house once, that's all it takes. The next thing you know, there's money missing off the dresser, and your daughter's knocked up. I seen it a hundred times.
Ted Nelson, Customer: But why do they put a guarantee on the box?
Tommy: Because they know all they sold ya was a guaranteed piece of crap. That's all it is, isn't it? Hey, if you want me to take a dump in a box and mark it guaranteed, I will. I got spare time. But for now, for your customer's sake, for your daughter's sake, ya might wanna think about buying a quality product from me.
https://www.youtube.com/watch?v=mEB7WbTTlu4 (https://www.youtube.com/watch?v=mEB7WbTTlu4)
-
Two different companies Ed. LL Bean has the same warranty and stands behind everything they sell. Some companies stand behind their products, some dont. I havent heard of any issues with people getting items repairedunder the warranty for rigid. Milwaukee on the other hand, acts alot like cabellas.
-
Milwaukee has taken care of me every time I had an issue with any of their products. They have paid my shipping both ways twice. Not even a problem with paperwork. They have been great to deal with.
-
Milwaukee has taken care of me every time I had an issue with any of their products. They have paid my shipping both ways twice. Not even a problem with paperwork. They have been great to deal with.
Good to hear, there have been reports on the general forums about them charging for repair. Even while still under warranty.
-
In my book there is only one brand of power tool to buy: Binford- When you need more power
(http://i8.photobucket.com/albums/a42/CaptShay/binford_zpsdceml0ql.gif) (http://s8.photobucket.com/user/CaptShay/media/binford_zpsdceml0ql.gif.html)
-
Good to hear, there have been reports on the general forums about them charging for repair. Even while still under warranty.
That was the Eggbeater Company that wouldn't stand behind their product. I heard it in a report on the interwebbs.
-
My electric mixer broke today 😞! I guess I'll have to hand mash the taters for dinner. Unless I can use one of these rigid setups? Will they mash my taters? What's the best speed setting?
-
Keith nice to hear from you hope you get taters mashed
-
My electric mixer broke today 😞! I guess I'll have to hand mash the taters for dinner. Unless I can use one of these rigid setups? Will they mash my taters? What's the best speed setting?
Again, why I say the open face style is better than that piece of junk you have. With a simple adapter (a guy on E-bay makes them) you can turn it in to one of these.
(http://i8.photobucket.com/albums/a42/CaptShay/egg-beater_zpshbzncbp8.jpg) (http://s8.photobucket.com/user/CaptShay/media/egg-beater_zpshbzncbp8.jpg.html)
HAPPY THANKSGIVING ALL!
-
My electric mixer broke today 😞! I guess I'll have to hand mash the taters for dinner. Unless I can use one of these rigid setups? Will they mash my taters? What's the best speed setting?
Cant use your propane setup? Prolly best to use it outside if you try, the fumes are no good in an enclosed area.
Either way, I got you buddy. Slow speed if you like them a little chunky, high speed to whip them. Side handle optional for the limp wristed.
(http://i247.photobucket.com/albums/gg121/willcooper4/20151126_191551_zpss7xdoz9b.jpg)
-
Cant use your propane setup? Prolly best to use it outside if you try, the fu6mes are no good in an enclosed area.
Either way, I got you buddy. Slow speed if you like them a little chunky, high speed to whip them. Side handle optional for the limp wristed.
(http://i247.photobucket.com/albums/gg121/willcooper4/20151126_191551_zpss7xdoz9b.jpg)
That's for paint stirring 👍💩 I'm not looking for stirred Taters. I like them mashed not stirred please 👅😛😎🍻
-
LOL ;D
-
That's for paint stirring 👍💩 I'm not looking for stirred Taters. I like them mashed not stirred please 👅😛😎🍻
Multi purpose Keith. Just another plus over those dino augers.
-
Multi purpose Keith. Just another plus over those dino augers.
[/quote ] "dino" Hmmm they are relatively new to the market and most brands have a propane auger now. Seems that they are on to something here. If I need some mixed drinks or have to mash or stir some taters on the ice, I'll bring my Dewalt :-)