IceShanty.com's Ice Fishing Community

IceShanty Main => General Ice Fishing Chit Chat => Topic started by: slushbuster on Jun 27, 2021, 08:15 AM

Title: Mickey Mouse boots studs
Post by: slushbuster on Jun 27, 2021, 08:15 AM: What length screws to use for Mickies? I am looking at getting Icespikes they are 3/8" screw thread length.
I know this will work for the heel area, but what about the front of heel and toe area?
I seen a picture from member ftwwalleye but he didn't give the screw length. I tried to PM but wasn't allowed.
Thanks
Title: Re: Mickey Mouse boots studs
Post by: hardwater diehard on Jun 27, 2021, 09:11 AM: May want to try the SEARCH function ...here are some past threads/posts I used.. mickey mouse boots studs in the SEARCH box...depending on your boot size you may wnt to get a pair of Kahtoola style ice cleats ..Amazon Warehouse have quite a few knockoffs versions ..but sizing may nor work for huge boots ..XL would be my choice ..but sizing varies from each seller so double check ..and no 3rd party unless they ship and are returnable via Amazon

https://www.iceshanty.com/ice_fishing/index.php?action=search2

https://www.amazon.com/s?k=ice+cleat&i=warehouse-deals&ref=nb_sb_noss_2
Title: Re: Mickey Mouse boots studs
Post by: matzilla on Jun 28, 2021, 08:42 AM: look at a cutway, they're not that thick in the sole and if you get that insulating felt wet they'll weigh 20lbs instead of 10lbs lol
Title: Re: Mickey Mouse boots studs
Post by: badger132 on Jun 28, 2021, 11:08 AM: I used to put hex head sheet metal screws in my running shoes, so I know those come short enough that I could not feel them through the shoes. I know they are not carbide, but they do work, and you should have a lot of options from Home Depot. I don't think carbide is required unless you walk a lot on concrete- I ran 5 miles a day on the road and they would last a hundred miles anyway.
Title: Re: Mickey Mouse boots studs
Post by: OldSailor on Jun 28, 2021, 01:06 PM: Check these....
https://carbidetractionproducts.com/boot-studs/bts-bootmaster-boot-studs/

https://koldkutter.com/
Title: Re: Mickey Mouse boots studs
Post by: filetandrelease on Jun 30, 2021, 09:15 PM: http:// https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwjYirmZ5sDxAhXH7bMKHTQoDboYABAFGgJxbg&ae=2&ohost=www.google.com&cid=CAASE-RoGeeZyNox1Mfu7PcjPVN9wDs&sig=AOD64_3DjJQ_rG_DgTtjmPOlm_G2n1ziqA&ctype=5&q=&ved=2ahUKEwi37LCZ5sDxAhVnRjABHU_EBUIQwg96BAgBECE&adurl=
Title: Re: Mickey Mouse boots studs
Post by: Tuma on Jun 30, 2021, 09:36 PM: I just slap a pair of XL Kahtoola ice cleats on my mickey mouse boots. That way I can remove them when I walk into the ice house and not scratch the floor.
Title: Re: Mickey Mouse boots studs
Post by: hardwater diehard on Jul 01, 2021, 08:08 AM: Quote from: Tuma on Jun 30, 2021, 09:36 PM
I just slap a pair of XL Kahtoola ice cleats on my mickey mouse boots. That way I can remove them when I walk into the ice house and not scratch the floor.

Amazon has alot of Kahtoola knockoffs fairly cheap .
Title: Re: Mickey Mouse boots studs
Post by: JIGMAN21 on Aug 08, 2021, 03:35 PM: 3/8 inch lol'd kutters.