IceShanty.com's Ice Fishing Community
Ice Fishing Tips -Check your local regulations! => Equipment => Topic started by: big-fat-john on Jan 21, 2019, 10:55 PM
-
I searched and didnt find any info on it so I'm posting here. Does anyone use a gas auger bit on their Milwaukee Fuel 2700/2800 series drill/drivers? Any issues?
I have a 5" lazer gas auger bit and a 8.25" chipper style auger bit. The powerhead died and they're just sitting in my basement. Wondering if I can use these without any issues. I'd want the 8.25" laying boards for pike. The 5" for panfish.
TIA
-
5" for sure would work just fine. Chipper is going to suck but with 1200 in/lb torque, it should turn it. May go too fast for the chipper blade though, if thats possible.
Youll have to make your own adapters.
-
the adapter they sale for the k drill to use on the plate is the one you want its the same size.you will be about double the weight I don't know about that hanging off the drill.clam plate might be okay other than battery life.i thought the same thing because its longer than the hand auger when attached.the k drill is serated blades also.pistol shaver blades.from a 8in mora to 8in lazer power gained about 12in height doubled weight 43/4 to 83/4 have not ran yet