IceShanty.com's Ice Fishing Community
Indiana => Ice Fishing Indiana => Topic started by: Steuben1 on Jan 20, 2010, 05:12 AM
-
Guys,
Been ice fishing for about 20 years now and heard about spudding your way out for safety. The embarrising things is, I don't really know how it works. I obviously know to spud the ice to see how thick it is, but what are the details? How many hits to determine if the ice is safe? I am sure there is more to it then just hitting the ice?
I know I should know, but I just don't.
Steuben1
-
Dependin on how hard ya hit the ice with spud,,we usally go 2 hits and look at cracks you make to determine the thickness and way the ice breaks up,,if cracking is close and tight its pretty dense,,if spread out around a foot area,,watch yourself.definatly bust a hole with it and measure with hands too this kind is not good,,lol http://smg.photobucket.com/albums/v634/IndyBassin/?action=view¤t=crumpliniceinjan.flv
watch they way the ice breaks,,ya see that,,back up......
-
I kinda like the 2 hits rule if it goes thru back up.
But also the sound the spud makes when it hits the Ice, there is a certain ring/ping the spud makes you will get a feel or an ear for that.
I like the Ice cracking thing I guess I just learned something new, always good to learn new things .
-
I used to have a spud yrs ago, passed down to me or cabbaged onto... from my pappy...however I can't find it these days (probably used it to debark a fence post and left it somewhere).... but where can you get one in this area? I haven't seen one in a store for ages.... at least Indy or southward.
HHD
-
In the process of making one....will post pics when finished.
-
Wouldn't any stout metal rod work....eg like I have a couple heavy steel rods I use to bust rocks when digging fence pole holes... they have either a pointed end or flat end. Say maybe just an old used axle? You are not actually cutting a hole with it...but listening more as a sounder... right? would be safer to carry around if not sharp.
HHD
-
Rural King here in Muncie has spud bars. I do not know how much.
-
Used to make em at work.....3/4" pipe and piece of leaf spring.
-
Say maybe just an old used axle? You are not actually cutting a hole with it...but listening more as a sounder... right? would be safer to carry around if not sharp.
HHD
the sound helps but they are chipping the ice with the spud. It goes through with one strike back up NOW
-
how high are you guys dropin the spud from seen some at bps thought bout pickin one up but unfamiliar with its use also, i always grab the auger and drill my way out.
-
What's a good weight to shoot for if making one. I'm looking forward to jigmup's pics.
-
I agree with RangerTime in regards to the sound but also the feeling in your hand. I like to use it like a walking stick, take my time and set up a cadence to your steps, and step and strike the ice at the same intrevals and listen and feel. If you go from a solid feeling and sound to dead, hollow thud, stop and check! Any variance stop and check! Better safe than wet.
-
You got me wondering as to how much my Spud Bar weighs.
So I checked it out .....8 lbs
It is around 7/8 inches in diameter and 54 inches in length.
The one end is flattend down to about 1 1/2 wide and about 6 inches long with a good sharp edge ground on the end.
I tend use mine like a walking stick as well.
One good tip I will tell you...... make sure you have a hole drilled in the end of the bar with a rope thru it and around your wrist.
Don't ask me how I know this. lol
-
I have a Lakco Ice Chisel that I bought from Sportsmans Guide. 8.5#, two piece, screws together.
http://www.sportsmansguide.com/net/cb/lakco-2-pc-deluxe-ice-chisel.aspx?a=423056 (http://www.sportsmansguide.com/net/cb/lakco-2-pc-deluxe-ice-chisel.aspx?a=423056)
-Jeff
-
If you have access to rebar I use # 5 and grind a point on the end. Works good for me and it's free.
-
Here's Dave Genz giving some tips on spudding thin ice. It is part 2 of the video. This is how I got started spudding to see if ice was safe.
Dave Genz spudding ice (http://vexilar.com/pages/extras/video/genz_safety_high.php)
-
Thanks for that vid. Did anyone else notice how easy that spud went thru?? He had the kind with the angled tip, like the one Jiffy makes. I've been wondering just how much better that style is than the straight tipped ones. Haven't actually seen any of the angled ones around here for sale. I went thru a homemade one and a store bought spud and haven't been happy with either. IMO it should go thru 2.5 inches in one whack. I haven't had one yet that will do that. That's the whole point of a spud right? So you can "whack as you go" ;) If it doesn't get thru 2" of ice in one whack, and you're walking like he is in the video, then you could STILL go thru. Anybody else notice the difference between the two types??
-
I use a 4ft. piece of railroad track, its alittle heavy but works
-
RR track? What are ya Paul Bunyon?
-
know YOUR spud!
i have used many over the years but the best advice i can offer is no matter what you get...go out and play with it. back in the day i had a 12# bruiser with a 2" wide end flattened and sharpened one side. i left mine at home so i grabbed my buddies and went on point. his was a rebar about 5 pounds and a 4" tip. needless to say as i walked and spudded in my usual way all seemed well. after about 100 yds out into wawasee my buddy stopped me and asked if i felt the ice sagging like he did...hmm. did 2 hits and it blased thru on the second. just under 2" and maxxed out the pucker meter! real spooky walk back!
long story short: my 12# with a narrow tip would almost go thru 2". i kept it sharp and could at least draw water on 2" with a good hit.
his lighter wider spud would only go 3/4 to maybe an inch on a solid whack!
i now use a 7# and throw it into the ice like a walking stick every other step. nice cadence and hit thru or down to 3" every 20 ft or so.
it doesnt matter what type of spud you get. its more important to use the one YOU know. and keep it sharp!! it makes a world of difference!! also if your point man have your buddy drag your sled so you can focus on what your doing. it takes ears and eyes to stay dry....and a spud!
(http://www.hooverfence.com/tools/spud-bar-sm.jpg)
-
Dependin on how hard ya hit the ice with spud,,we usally go 2 hits and look at cracks you make to determine the thickness and way the ice breaks up,,if cracking is close and tight its pretty dense,,if spread out around a foot area,,watch yourself.definatly bust a hole with it and measure with hands too this kind is not good,,lol http://smg.photobucket.com/albums/v634/IndyBassin/?action=view¤t=crumpliniceinjan.flv (http://smg.photobucket.com/albums/v634/IndyBassin/?action=view¤t=crumpliniceinjan.flv) watch they way the ice breaks,,ya see that,,back up......
Now your video link should work.
In that video the guys spud must have a flat piece on one end or it doesn't have a chisel end. I remember actually chopping fresh holes with gramps and the spudbar. Back then you didn't make allot of holes, to much work.....
Can't find find my spud, I use it every year and I am dumbfounded that I can't find it....grrrrrrrr...... looks like I will have to get another one. Its not safe walking around without one in the ice conditions we have now.
-
i actually have same spud that is in A-bombs post,,used the edge end and wasnt effective enough to show how bad it actually was so i used the handle end for effect.
-
Simply spud a little hole ( a few hits ) big enough to stick a finger or two down in, if you cant grab the bottom of the ice with just a finger or two it should be safe... Ive got big hands so if I cant grab the bottom im looking at 3-4+ inches.
-
Hmmmm... I have the same bar as in A-bomb's pic....(prob got at Menards or lowes) but I use it for post holes...eg round flat end to tamp dirt, sharp end to chip out rock. Hadn't thought of it as a spud. The spud I remember is more like Jeff's link.... had square bar stock on the end cut to an angle and very sharp as to where you could cut a hole. It made an excellent post debarker ! Looks like I need a couple more broom clips for the "don't laugh" sled ;D
HHD
-
Been using spuds for decades. We used to cut our holes with them. Then came the dredful spoon, then the hand auger,followed by gas,and now use the hand drill. My dad made several spuds in the shipyard where he worked. I inherited a few. I now use them for safety.The one I prefer has a solid 3/4 inch bar leading to an inch and a half tempered blade. I just swing it in my right hand. It comes down every time my left foot does as I walk. Due to it's weight it lets us know if we are in jeopardy. One other thing, there is a ring on the non-business end. A 1/4 inch rope about 20 inches long with a loop goes arond my wrist. The old man always said there were a lot of spuds stuck in the bottom of lakes. :-\ I fish the slough a lot. That spud has kept me dry more than once. lol.
-
Ok...got the spud bar done. She weighs 11 pounds and is 49.5 inches long. The chisel tip is 1-3/8" wide.
Here are the pics.
7/8ths bar stock with the end heated
(http://img2.pict.com/11/20/fa/2601195/0/320/picture093.jpg) (http://img2.pict.com/1e/dc/7a/2601196/0/320/picture094.jpg)
After Hammering out...the rough shape
(http://img2.pict.com/f3/97/f2/2601198/0/320/picture095.jpg)
Ground down to sharp edge..only one side beveled (sorry for the bad pic)
(http://img2.pict.com/0d/71/a7/2601202/0/320/picture097.jpg)
a piece of rebar I had laying around for the handle
(http://img2.pict.com/d7/73/3d/2601204/0/320/picture098.jpg)
welded, painted and ready for spudding
(http://img2.pict.com/86/18/86/2601207/0/800/picture099.jpg)
-
Lookin good! Let us know how it works.
-
Brett, I liked the one Genz had in that video. It was long enough you could just "Pole-vault" right over the bad ice!!! ;D ;D
-
Good job, Jigmup ;D Looks good. Just learn it and it will keep you dry. Again, good job. kas
-
Brett, I liked the one Genz had in that video. It was long enough you could just "Pole-vault" right over the bad ice!!! ;D ;D
Yea I noticed that too. His spud was either long or he is short! (I think he's short) ;)
-
nice job on the new spud jigmup. Gonna put a lanyard on that baby or take your chances?