Sharpener that works!

[Agronomist_at_IA]

Used it on a pair of scissors. Wow a sharpener that works and works really well

[lefty2053]

I bought one last year and used it on my 7" Nero Baldes. Worked pretty good.

[OldSailor]

Can this be used on knives also? What is the P/N of the kit?? Price?? Thanks!! 

[lefty2053]

There are a lot of different kits. Here is an example. https://www.google.com/search?client=avast&q=gatco+shapener

[OldSailor]

Lansky has a number of kits also! Thanks!!

[skifisher]

  on the Lansky. Sharpens well and reasonable.

[Agronomist_at_IA]

Can this be used on knives also? What is the P/N of the kit?? Price?? Thanks!! 

Kit below was $15 on amazon if i can remember. Has 3 degrees 22* 25* and an 11*.  Impressed with just how SIMPLE yet effective it is. Not to mention easy

[FishGut]

Will this kit hone Lazer blades? Or my old spoon auger?

[hardwater diehard]

Found these two items for those of us that have kits but not the proper angles needed for sharpening auger blades as described in the instructions provided ..thanks Argo




https://www.amazon.com/GTC17002-BRK-Knife-Clamp-Honing-Guide/dp/B000F6W8WC/ref=sr_1_8?crid=1P0CXXX521JP9&keywords=gatco+sharpening+system&qid=1569756108&sprefix=gatco+sh%2Caps%2C173&sr=8-8

https://www.amazon.com/Gatco-12001-Easy-Grip-Clamp-Mount/dp/B001B3J5VK/ref=sr_1_17?crid=1P0CXXX521JP9&keywords=gatco+sharpening+system&qid=1569756108&sprefix=gatco+sh%2Caps%2C173&sr=8-17

[tomturkey]

For knifes I only use a cheap Rada Sharpener. I have finally been able to get an edge on a Dexter Boning knife I have had for over 50 years. I also have a pretty big collection of Rada knifes as they last for ever.

I had a sharpener for my 6 inch Mora that touched it up pretty good. I had to touch it up quite a bit as the lake I was fishing had a lot of sand in it from the sand dunes next to it. I have no clue where it went to so I do not know what brand it was.

[Agronomist_at_IA]

Will this kit hone Lazer blades? Or my old spoon auger?

I dont think so. Maybe lazer blades....

[stinkyfingers]

Will this kit hone Lazer blades? Or my old spoon auger?

That spoon auger of yours needs to go on the wall or to the metal recyclers.

Gatco and Lansky sharpeners will work fine for auger blades but, of course, the trick is to match that factory angle exactly. Take a Marks-a-Lot along that bevel edge before

 sharpening to ensure that you're at the same angle. If the sharpener strokes aren't removing the ink mark evenly, then you'll need to adjust until they do.

[Drifter_016]

I have a Lansky diamond kit.
Works mint. I can shave with my knives after sharpening them.

[Unclegillhunter]

Been a Lansky user for years. A couple of months ago came across a crazy deal on a work sharp unit. Loved setting and putting an edge on my kitchen knives. Liked to listen to my music and just hang. Got the work sharp and now can’t even get into my tunes.
Keep it safe! JDL

[ice dawg]

Work Sharp here too.

[filetandrelease]

 Work sharp now here to ,

[Baetis62]

Worksharp is great but doesn't seem to finish it in as well as my old Warthog.  They're gone but does anybody use a Worksharp and finish with a Lansky Diamond setup?