Author Topic: Cleaning tiny Tungsten eyes?  (Read 7614 times)

Offline dkfry

  • Team IceShanty Maniac
  • **
  • Posts: 2,873
Re: Cleaning tiny Tungsten eyes?
« Reply #30 on: Feb 01, 2021, 04:34 PM »
I usually cut the paint off of each side with a small Tajima box cutter knife with the snap off blades I have and then use a hook or needle to clear the center of the eye. I found some paint to be brittle and can chip off easily, especially epoxy if I just jam something through the eye without cutting first.

 



Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.