IceShanty.com's Ice Fishing Community
IceShanty Main => General Ice Fishing Chit Chat => Topic started by: Mainedog on Nov 26, 2021, 01:14 PM
-
Looking for a way to have my strikemaster 40v drive a Nils.
Has anybody done this? Is so how?
Thanks
MD
-
Think you will need two adapters
The Eskimo power auger adaptor and
The a Clam to Nils adaptor
As long as your Nils is not Orange
-
I believe this one will get you from the 22mm power head to 18mm
https://geteskimo.com/collections/auger-accessories/products/pistol-bit-adapter
this one should get you from the 18mm to the Nils
https://shop.clamoutdoors.com/nils-auger-adapter-for-conversion-kit.html
going to have to do some research
-
Thanks for the info. So the Strikemaster goes into the Eskimo adapter. The male end of the Eskimo would go in one end of the clam adapter, and the Nils would go into the other end of the clam adapter? Just trying to visualize how it would all fit together.
I have a blue hand cranked Nils.
Thanks for your help.
MD.
-
Thanks for the info. So the Strikemaster goes into the Eskimo adapter. The male end of the Eskimo would go in one end of the clam adapter, and the Nils would go into the other end of the clam adapter? Just trying to visualize how it would all fit together.
I have a blue hand cranked Nils.
Thanks for your help.
MD.
Yes ..you may want to verify that the Eskimo adapter is 22mm to 18mm ..the Clam female part is designed to go onto the Clam Plate output shaft which is 18 mm.
this maybe something to look into
https://www.surpluscenter.com/New-Arrivals/Ice-Auger-Adapter-w-Black-Oxide-Steel-Screws-for-Nils-USA-Augers-to-Trophy-Strike-or-Clam-120V-Powerheads-108708-1-5751-A.axd