Auger Sharpening

[daggy]

My Auger has gotten very dull, looking for tips on sharpening my auger blades.
thanks

[RStock521]

There's a hundred threads on it, including one going right now.  If it's a Nils, it needs to go to Frank Deluca.  Search his name on here.

[hardwater diehard]

There's a hundred threads on it, including one going right now.  If it's a Nils, it needs to go to Frank Deluca.  Search his name on here.

X2

[4eyeman]

I send mine to Fish 307. $15 a set plus shipping. I'll send in four at a time. Been happy with their service and they are advertise on here.

[hawg]

If it’s a chipper it’s easy, shavers are easy too if your careful and know what you’re doing. Lazers need to be sent in, exchanged, or tossed.

[perch chacer]

I send mine to Fish 307. $15 a set plus shipping. I'll send in four at a time. Been happy with their service and they are advertise on here.

I 2nd the Fish 307 blade sharpening service, and they are a Ice Shanty sponsor.

[badger132]

If it’s a chipper it’s easy, shavers are easy too if your careful and know what you’re doing. Lazers need to be sent in, exchanged, or tossed.

I sharpen my Lazer blades on a paper wheel, and have even used my Worksharp. Easy enough if you are comfortable sharpening freehand. I use a jewelers Loupe to see the burr anymore, but the only type I have not done so far is Nils- can't figure out how to get my tooling in that small space, and don't have the patience to do it by hand.

[jackpine]

FB page:  ice auger sharpening