Aqua Vu Customer Service Stinks!

[Gunflint]

I just remember that it wasn’t hard. That is probably why I don’t remember the details.

[kayl]

Yeah, there is a video on the micro II but not the revolution 5.0.

It's virtually the same as the micro II.
You can see the internals of the Micro Revolution 5 Pro on my thread about upgrading the memory. https://www.iceshanty.com/ice_fishing/index.php?topic=369940.msg3988676

In order to replace the battery you will need to desolder the old one and solder the new one to the board.

[Gunflint]

It's virtually the same as the micro II.
You can see the internals of the Micro Revolution 5 Pro on my thread about upgrading the memory. https://www.iceshanty.com/ice_fishing/index.php?topic=369940.msg3988676

In order to replace the battery you will need to desolder the old one and solder the new one to the board.

Yup...I think that I used that thread as well.

Thank you Kayl!

[SchlitzBeer]

Thanks for help fellas! I wanted to also state that I have been in contact with the Aqua Vu service department and they have been nothing but extremely helpful.