Support Iceshanty... Get some great gear and forum goodies... Join The Iceshanty Hardwater Militia
You’re going to want a digital reading I’m sure but Ion I had 11/16” by 2” . Bring on the variety of answers
ION 18 mm Strikemaster 22mmwhat are you trying to accomplish?
These adapters will get you in/out of most combinations/situation https://geteskimo.com/products/pistol-bit-adapter ...22mm to 18mmhttps://shop.clamoutdoors.com/k-drill-power-auger-adapter-for-conversion-kit.html 18mm to 22mm
ishoot308 What is it that you are trying to accomplish ..others may have been there and done that ?
Trying to determine which one will fit my Auger Caddy best or what I need to do to modify it and make it work. My auger caddy currently works and fits all Jiffy auger stems…Auger caddy is on back of Ranger in pic below….Thanks!Dan
Are you trying to modify a gas Jiffy to another auger bit ...Jiffy turns counter clockwise ...most others turn clockwise ?
No not at all….thinking about replacing the Jiffy with an electric but I want it to fit my auger caddy….Dan
So the auger head goes into the caddy and the auger bit attached to the bottom of the caddy? Is it integrated Or does the caddy just go around the bit at motor stem? That’s pretty fancy
Strike is 1 7/8” in length7/8” diameter
Looks like the Strikemaster will work without any or very minimal modifications!….Thank you!Dan