Best Ice Deals!! Lets hear em!

[VTMatt]

Sierra Trading Post has Korkers Snowjack boots for $69 ( reg. $189) with free shipping if you sign up for email. I have these boots and like them.  Several reviews of them on here if you search.

https://www.sierratradingpost.com/korkers-snowjack-snow-boots-waterproof-insulated-for-men~p~236fu/?filterString=s~korkers-outsole%2F

Ordered a backup pair, thanks!  Carbide studded soles alone are about $40 and they are included.

[Ice Surveyor]

Those Korkers are normally $90, not $180.  Sounds like a good deal, but not that good!

[DucksAndDogs]

Bless you lynng!  I was getting bored out of my skull reading all of the whining and back tracking being done over the Overton’s baloney!

Listen everyone.  Y’all know that this guy loves a great deal more than anyone, but I avoided the Overton’s deal like the plague.  If I can pass one worthy bit of advice on to all of you, it would be this;  If it sounds to good to be true, it usually is.  One last thought... If Overton’s had erred and actually allowed multiple orders for essentially free products, would you have felt ok taking advantage of them for the error?  Those of you that just nodded yes need to look in the mirror.

DN

I don’t see a problem with it if they don’t say ANYWHERE that it’s only good for one order.  Don’t call my character into question for attempting to purchase during a sale when the vendor makes it out to be a screaming deal, knows what they’re doing, and never once mentions that it’s only good for one order.

Like I said, I know I’m getting a deal, I just wish they would have said that from the beginning so A) I wouldn’t have wasted so much time and B) I could have gotten something I needed rather than shotgunning a bunch of orders out there.

[VTMatt]

Those Korkers are normally $90, not $180.  Sounds like a good deal, but not that good!

They sell for 189. FishUSA are selling the same boots for 189. Wicked deal on a wicked boot.

[DucksAndDogs]

I don’t know if it’s been mentioned, or not.  FishUSA has all of their clearance stuff marked down another 30% and they have 20% off of gloves.

[rdhammah]

Ordered a backup pair, thanks!  Carbide studded soles alone are about $40 and they are included.

400g thinsulate insulation. if all you need is 400g, you don't need the studs. I use minimum 1000g for my ice fishing needs

[VTMatt]

400g thinsulate insulation. if all you need is 400g, you don't need the studs. I use minimum 1000g for my ice fishing needs

Why would I not need studs? 

[chilly-willy]

Another Good deal on a shanty from sheels not a bad price to keep some one warm.. it's smaller then a eskimo 3i or a frabill...  but I think they built this shanty around the regular buddy heater...  so you don't got to go over kill on heating costs.. by the way these are 75 inches tall not 80 inches  I can barely stand in middle of it so keep it in mind.. but for 199.99 it light warm and saves money on running the propane in this cold weather we have..


https://www.scheels.com/p/otter-xth-cabin-hub-ice-house/60914221024.html?cgid=ice-fishing#sz=12&start=1

[chilly-willy]

Another deal on a shanty!!  this one is a cabelas for 259.99..  even has sky lighting for knot tying..  and your saving $70 ..

http://www.cabelas.com/product/bargain-cave/fishing/ice-fishing/pc/105591780/c/105740280/sc/105747480/cabelas-wide-bottom-therm-hub-shelter/2564898.uts?slotId=5

[chilly-willy]

Eskimo 3i for $199.99the black roof model

http://www.landmsupply.com/department/sporting-goods/ice-fishing/fish-houses/hub-style/eskimo-quickfish-3i-insulated-pop-up-shelter

[lefty2053]

Shappell. I had the 5500 and sold it and got the 6500 a couple years ago. I liked the 5500 just went bigger.
https://www.sportsmansguide.com/product/index/shappell-wide-house-5500-ice-fishing-shelter?a=1028397

[lefty2053]

Here is the 6500.
https://www.sportsmansguide.com/product/index/shappell-wide-house-6500-ice-fishing-shelter?a=1028398

[Stickhick86]

here is a real cheap one

http://www.cabelas.com/product/CABELAS-PERSON-HUB-ICE-SHELTER-X-COMBO/2564900.uts?slotId=2

[1moslab]

400g thinsulate insulation. if all you need is 400g, you don't need the studs. I use minimum 1000g for my ice fishing needs

.   That's what I thought how can 400 grams work on the ice.but I don't own a pair

[chilly-willy]

Jiffy model 44 propane auger not sure if it's a good model but 375.99 instead of 455 is a bettee price if you ask me then a eskimo auger.. I think the small sting ray sells for  around $375 and I hear Eskimos develop  leaks in the gas lines?? don't know it that's true??


http://www.marinegeneral.com/productdetails.asp?productid=1645373&directoryid=11514&parentid=10949

[chilly-willy]

Genz pack fl8 $259.95 not the  greatest deal but better then retail.

http://www.marinegeneral.com/productdetails.asp?productid=1461553&directoryid=11734&parentid=10947

[chilly-willy]

Shappell. I had the 5500 and sold it and got the 6500 a couple years ago. I liked the 5500 just went bigger.
https://www.sportsmansguide.com/product/index/shappell-wide-house-5500-ice-fishing-shelter?a=1028397

Hay lefty thanks!!  just to let guys know this 5500 is $175


http://www.marinegeneral.com/productdetails.asp?productid=1531210&directoryid=1170861&parentid=11953

[chilly-willy]

Strike master chipper lite auger reg $350 I think on sale $285 but a gas model..

http://www.marinegeneral.com/productdetails.asp?productid=1645393&directoryid=1170861&parentid=11953

[chilly-willy]

Quick fish 3i just encase you missed it for 199.99 at l&m supply in this threads post #2169 just a heads up  it's $205 here.


http://www.marinegeneral.com/productdetails.asp?productid=1645635&directoryid=1170861&parentid=11953



Now we should be back on topic!! I just put up a ton of deals!!

[chilly-willy]

Select Ice jigs at fish usa 20%off

https://www.fishusa.com/ice-jig-savings?utm_source=bronto&utm_medium=email&utm_term=Ice+Jig+Savings&utm_content=01/04/2018&utm_campaign=2018.01.04+Jig+Sale&_bta_tid=20982155971401964119075097207018298333187179713886772477697659896692081718542983409649968427176197102763272

[Stickhick86]

Frabill Jacket I2

https://www.walmart.com/ip/Frabill-Jacket-I2/40371290?wmlspartner=dsn_cri_f3b9eed5-0b58-4a59-8415-ee5b10211eb7&veh=dsn&sourceid=dsn_cri_f3b9eed5-0b58-4a59-8415-ee5b10211eb7_5a4e24e7e6489471dda4689e72f21302&campaign_id=127117&site_id=4334534&creative_id=9169237&ad_id=9219312&advertiser_id=d6cba952-434a-4dce-a92f-25bc9c14b761

[Spoondangler]

.   That's what I thought how can 400 grams work on the ice.but I don't own a pair

I've used them on the ice three full days. These are my boot for trips where I'll be inside a shanty or short trips, but my feet don't really get cold in general. I have muck artic pros as well

[lefty2053]

Just picked up another Rdigid Gen 5x Brushless drill used for $50. My new one went into the box and will possibly be never used. The guy also had 2 Brand New Gen 4x Brushed Drills 650 In Pound for $50 each. I picked the best one.

[JohnnyO19]

Lefty I haven't heard very good reviews about the Rdigid Brushless drills, say they burn out pretty quick

[EmptyPockets410]

Just scored a Big Buddy for $104.99 at Menards, should be nice considering the sub zero temps we've been having in Wisconsin.

[lefty2053]

Lefty I haven't heard very good reviews about the Rdigid Brushless drills, say they burn out pretty quick

Time will tell. I am going to use the used one and hope for the best. If it burns out soon I will return the new one and get something else. But it doesn't get hot and doesn't struggle while cutting.

[Spoondangler]

Time will tell. I am going to use the used one and hope for the best. If it burns out soon I will return the new one and get something else. But it doesn't get hot and doesn't struggle while cutting.

Anyone know why brushless is important for an ice drill setup?

[sodakdave]

Anyone know why brushless is important for an ice drill setup?

In a tool with a brushless motor, the motor adjusts according to the task. The more resistance a drill or saw senses, the more power it draws, and conversely a lack of resistance lessens the pull. This is a huge advancement when it comes managing battery life, which ups runtime and increases the performance of cordless power tools. A standard brushed motor will always max out on whatever speed it's set at.

[Spoondangler]

In a tool with a brushless motor, the motor adjusts according to the task. The more resistance a drill or saw senses, the more power it draws, and conversely a lack of resistance lessens the pull. This is a huge advancement when it comes managing battery life, which ups runtime and increases the performance of cordless power tools. A standard brushed motor will always max out on whatever speed it's set at.

thanks

[bootstrap]

Just scored a Big Buddy for $104.99 at Menards, should be nice considering the sub zero temps we've been having in Wisconsin.

sez not avail online