Author Topic: F.O.E.A.O. Eskimo Auger owners Unite ! (Read 363756 times)

Idahogator · « **Reply #1080 on:** Nov 20, 2011, 08:16 PM »

That's a good record day ~ close enough to call it a fish per hole. Good luck with the vid.

fordkisskrazy · « **Reply #1081 on:** Nov 20, 2011, 10:00 PM »

I hope this works! Sorry its not very good but we were fishing, not making movie's. Lol

Idahogator · « **Reply #1082 on:** Nov 20, 2011, 11:52 PM »

The Mo Movie, good one there FKK. That Mo sure slings the snow-cone makin's.

And from the sounds toward the end, you were makin' ice.

Is there a fish story to go with this?

surflizard · « **Reply #1083 on:** Nov 21, 2011, 06:56 AM »

Thanks for sharing that with us FKK, Loved the sound of the poppin Ice !!

hoghammer · « **Reply #1084 on:** Nov 21, 2011, 08:13 AM »

Nice FFK I am so jealous now waiting for the ice up here. I am getting out in the next couple days on my buddies lake for some perch. Loved the sound of your MOpoppin holes

Rebelss · « **Reply #1085 on:** Nov 21, 2011, 08:32 AM »

OOOOOHHHHHHIIIEEEE!!!!

That got me all excited!!! Way to go, FKK!!!

vexvision · « **Reply #1086 on:** Nov 21, 2011, 07:49 PM »

Just bought my first Eskimo, a Z51 Shark 8". Glens hooked it up big time!!!!!!!!!!!!.

So, now I want my cool FOEAO red emblem to sport. Dont suppose someone could tell me how to do that or where to get it!

Big Red Shack · « **Reply #1087 on:** Nov 21, 2011, 07:53 PM »

Quote from: vexvision on Nov 21, 2011, 07:49 PM

Just bought my first Eskimo, a Z51 Shark 8". Glens hooked it up big time!!!!!!!!!!!!.

So, now I want my cool FOEAO red emblem to sport. Dont suppose someone could tell me how to do that or where to get it!

i believe if you check back on page 32ish there are instructions

vexvision · « **Reply #1088 on:** Nov 21, 2011, 09:03 PM »

schreeet, thanks big red.................

DasRottweiler · « **Reply #1089 on:** Nov 22, 2011, 03:01 PM »

Quote from: vexvision on Nov 21, 2011, 09:03 PM

schreeet, thanks big red.................

Howdy Vexvision! Welcome to the Crew. If you could copy an Eskimo frat sig without my name and eskimo model on it , I would be appreciative! NP really but I figure ya may wanna customize your own. Rott

vexvision · « **Reply #1090 on:** Nov 22, 2011, 04:27 PM »

LOL, so sorry Rot........I didnt even notice until someone else mentioned it. I wouldnt even know how to customize it anyways but I really am sorry.

I have er all straightened out now!

DasRottweiler · « **Reply #1091 on:** Nov 22, 2011, 05:04 PM »

LOL-not an issue. But TY VV! When I get a chance I`ll do one for ya and post it so you can copy it.

vexvision · « **Reply #1092 on:** Nov 22, 2011, 05:43 PM »

O ya, sound cool. Thanks Rot!!

vexvision · « **Reply #1093 on:** Nov 23, 2011, 02:29 PM »

Hey guys, I just received my z51 shark today, only two days after ordering!! My plan is to use amsoil saber at 100-1 with a cap of gumout and a cap of stabil. Sound okay?

gmoney · « **Reply #1094 on:** Nov 23, 2011, 03:16 PM »

I just got a 10" z51 on the weekend, I can't wait to start drilling some holes!

hoghammer · « **Reply #1095 on:** Nov 23, 2011, 06:29 PM »

Quote from: gmoney on Nov 23, 2011, 03:16 PM

I just got a 10" z51 on the weekend, I can't wait to start drilling some holes!

Welcome to the club gmoney, you will be happy with your new MO

to bad we are gettin +6 C the next few days

vexvision · « **Reply #1096 on:** Nov 23, 2011, 06:51 PM »

OOOOOOOOOOOOO man, I need to here this thing run!!! This is rediculous, I think Ill just go stare at it some more!

Rebelss · « **Reply #1097 on:** Nov 23, 2011, 07:02 PM »

Hold it upright with a beer, and go "RRRRRRRRRRWHIIIIIIINER RRRR"...

vexvision · « **Reply #1098 on:** Nov 23, 2011, 07:24 PM »

Quote from: Rebelss on Nov 06, 2011, 03:37 PM

Here it is:

Depends on how picky you are about your engine. Start it, just let it idle for the first 10 minutes or so, then shut 'er down and let it cool off. Re-start, and slowly bring revs up, then down, slowly advancing up to Midrange. Shut off; let cool down. Repeat, slowly advancing engine to WOT. Remember to let it idle as long as it was at higher rpms; if you ran it at high revs for 15 seconds, let it drop to idle for at least that long. Proper break-in sets the stage for the future of your engine....no reason to pound the heck out of it right away. Run it at the PROPER oil specified ratio with a good (Viper) 2 stroke oil for Air-cooled engines.

Great info, Im gonna gasser up tomorrow and break er in!!!

Rebelss · « **Reply #1099 on:** Nov 23, 2011, 07:29 PM »

Best time is about 5:00 am so the neighbor's can see your new purchase!!!

FishinBill · « **Reply #1100 on:** Nov 23, 2011, 11:30 PM »

I'm a new owner of a Stringray!!!

This is my first power auger and just wanted to thanks to Rebelss and the others for tips on breaking in the motor. Followed the instructions last night, my neighbors were looking and even had the police come by

and then fired her up today with one pull. Running the Saber Pro in it 50:1 with seafoam.

Hope to post some action shots in the future, do I really have to cudle with it to break it in

.

fordkisskrazy · « **Reply #1101 on:** Nov 23, 2011, 11:52 PM »

Quote from: FishinBill on Nov 23, 2011, 11:30 PM

do I really have to cudle with it to break it in .

Lol! Yes you do!! Well you don't have to.......but one would think that you would want to. And pat it and love it and call it....
Congrats on the new MO's guys your gonna love em!
Just want to wish everyone a happy turkey day! Gonna head out friday and do some more field testing, fishing, hopefully, been in the 50's and 60's here again. Hoping we don't lose our ice.

surflizard · « **Reply #1102 on:** Nov 24, 2011, 07:12 AM »

Welcome to the shanty and welcome to F.O.E.A.O. FishinBill, Glad to have ya aboard ! An unloved MO is an Unhappy MO !!

Iwant to wish all of the F.O.E.A.O. Brotherhood a Happy and Safe Thanksgiving !

Surf

vexvision · « **Reply #1103 on:** Nov 24, 2011, 08:00 AM »

Happy Thanksgiving guys!! Dont forget to feed your auger!! I just wanna give thanks to FOEAO for helping me decide on the best auger, best running procedure, and proper mixing!!! All I need now is some ice to with this turkey!!

Tomhusker · « **Reply #1104 on:** Nov 24, 2011, 08:33 AM »

I ordered an Eskimo Stingray today. Can I now join this group?

Do I get a patch, or membership card or something?

vexvision · « **Reply #1105 on:** Nov 24, 2011, 08:52 AM »

Yeah man, welcome aboard!! I just joined also! Right click on my patch, save to desktop, upload in photobucket, add to your profile signature box and voila!! Make sure you use my patch, I learned this by copying a customized one on accident..........sorr y ROT...........still kinda chuckling over here about that one!!

Go MOor go hOMe

FishinBill · « **Reply #1106 on:** Nov 24, 2011, 11:19 AM »

Thanks for the welcome fellas! She's gonna get plenty of love, have already fired her up 3 days in a row in 40-50 degree weather. Ice better form soon or the freezer better watch out

.

Happy Thanksgiving to you all! I have something new to be thankful for now, MOlicious.

FishinBill · « **Reply #1107 on:** Nov 24, 2011, 11:27 AM »

Vex hope you don't mind if I use it also, thanks.

vexvision · « **Reply #1108 on:** Nov 24, 2011, 11:52 AM »

No Problem boys!!! Glad I could help, the seasoned vets must be sleepin in lately. Im just Happy to be on iceshanty and watching the big game!!

Im tellin ya, Im half temped to freeze a bucket of water just to drill a hole in it!!

Even turned the Vex on just to listen to er purrrrr!!!

surflizard · « **Reply #1109 on:** Nov 24, 2011, 12:00 PM »

Welcome all to F.O.E.A.O. Glad to have ya aboard ! Nice to see the new guys stepping up, there is a wealth of information stored here in the posts of F.O.E.A.O. Please feel free to browse thru it and see what we are all about !

Surf S.A.A

News:

Author Topic: F.O.E.A.O. Eskimo Auger owners Unite ! (Read 363756 times)

surflizard

surflizard

surflizard