Author Topic: Rigging tube jigs  (Read 386 times)

Offline JTrottaNY

  • IceShanty Rookie
  • **
  • Posts: 92
Rigging tube jigs
« on: Mar 09, 2017, 08:03 AM »
How many run the jig all the way up the inside of the tube and poke the hook through the side?

How many run the jig head up the length of the hook shank and let the hook gap exit out the bottom of the tube in the skirt tassles?

Advantage to doing it one way or the other?

Offline slipperybob

  • Team IceShanty Maniac
  • **
  • Posts: 3,944
  • LX5 or die...maybe extra battery.
Re: Rigging tube jigs
« Reply #1 on: Dec 13, 2017, 10:12 PM »
Sticking the jig head inside of the tube, makes the tube profile bigger - width wise.  Also less chance for air pocket in tube.  For some reason, I my bite rate goes way down rigged this way.

With jig hook threaded onto tube or just poking hook through tube head, I get more bites.  Tube is also more easily shredded.

I have to go with what the fish wants to bite.

For more information read my MN nice journal


Follow Iceshanty at Twitter Iceshanty Facebook Page Iceshanty Youtube Channel
Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996-
All Rights Reserved.