Support Iceshanty... Get some great gear and forum goodies... Join The Iceshanty Hardwater Militia
Still trying to figure out what settings to use. I was jigging in only 12-15 feet of water. I could only see my jig when it was moving. Kept losing it when it was still. Marked a couple fish but ended up hooking up on one that I didn't see. I played around with the settings - seemed like the narrowest beam (7-degrees) was the best, almost I was losing my jig with a wider beam, which seems counter-intuitive. I tried toggling CHIRP on and off - I'm not sure if it helped me or not. Auto-zoom bottom depth. Interference level high. Default brightness. Ultra scroll speed.Do you set the foam float so that the transducer hangs below the bottom of the hole, or just set it as shallow as possible on the water surface? It was definitely off-vertical at times, which could have caused some problems.Anyway I need some practice to get this system tuned in, but any advice on settings would be helpful