shanty rod holders?

[spencerville]

I have a 2 man flip over nanook. Anyone have any tips for rod holders to mount on the side to free up my hands while changing jigs or messing with a fish? Any pics of your set ups?

[Den58]

Otter makes some good rod holders I have a frabill one man  and they work great

[Stickhick86]

https://www.cabelas.com/product/Catch-Cover-Multiflex-Ice-Rod-Holders/1177126.uts?productVariantId=1318293&WT.tsrc=PPC&WT.mc_id=GoogleProductAds&WT.z_mc_id1=03047232&rid=20&ds_rl=1246492&ds_rl=1246531&ds_rl=1247882&ds_rl=1252079&gclid=EAIaIQobChMI3NCth6Gs3wIVlVmGCh3OfAjkEAQYAiABEgJCi_D_BwE&gclsrc=aw.ds

[netminder34]

When I had my Frabill commando I took a couple of wire rod holders that you put in the ground/bank.  I used a couple small metal wire clamps with the rubber inserts and mounted 2 per holder to the sled where I wanted the holders.  Insert the holder, check position, remove and bend until you get desired position.  The one thing I liked about them was they were easily swung out of the way for hole positioning, putting on the cover, and transport.

[sleddog1]

[spencerville]

What size would be best for ice gear?

[tightliner812]

I haven’t used them but the cold snap rod holders are  supposed to be good.
Here’s a link that you can order them from for ice rods.
https://www.yourbobbersdown.com/product-p/csrc.htm

[sleddog1]

What size would be best for ice gear?

What diameter is Ice Gear?

[3300]

When I had my Frabill commando I took a couple of wire rod holders that you put in the ground/bank.  I used a couple small metal wire clamps with the rubber inserts and mounted 2 per holder to the sled where I wanted the holders.  Insert the holder, check position, remove and bend until you get desired position.  The one thing I liked about them was they were easily swung out of the way for hole positioning, putting on the cover, and transport.

i use them too in my shappell in the tube that holds the seat up, one on both sides.

[river_scum]

I seen some made from heavy wire, that just hung on the edge of the sled.  that pole clip deal would a be great extra hand though.

I have pieces of pvc(thin drain kind) screwed to my sled edge with wing nuts.  can take them off easy but I don't.  I just turn then in line with tub and go.

[bart]

I made rod holders out of pieces of sink tailpiece extension, they work great.

I also used two different size sink tailpiece extensions so they nest together, saves a little bit of room.

For my dead stick I use a Multi-Flex Rod Holder from Catch Cover.

[spencerville]

What diameter is Ice Gear?

Going to give the clamp on a try. I believe the size is in reference to shanty pole size and mine look much bigger than my old rover 1.0 so I went with the lg.

[spencerville]

I seen some made from heavy wire, that just hung on the edge of the sled.  that pole clip deal would a be great extra hand though.

I have pieces of pvc(thin drain kind) screwed to my sled edge with wing nuts.  can take them off easy but I don't.  I just turn then in line with tub and go.

I thought about making some like you have or even the pvc. But for 4 dollars ea. I decided to try the clamps with adjustment both ways. Seems to be a new product so
Ill definitely give them some feed back on amazon review once I've used them a bit.