The Iceshanty Ice Auger Board is sponsored by
Nils Master Authorized Sharpening Service

Author Topic: Drill to auger adapter  (Read 1011 times)

Offline walleyeboater

  • Team IceShanty Addict
  • *
  • Posts: 608
Drill to auger adapter
« on: Nov 24, 2017, 06:52 PM »
I'm sure this has been asked, but is there an adapter for a 6" Nils aqua colored auger? (Blue)
I'm not going to update my drill, if it's not going work.
Thx

Offline Sharp Nils

  • Iceshanty Sponsor
  • Team IceShanty Regular
  • *
  • Posts: 267
Re: Drill to auger adapter
« Reply #1 on: Nov 25, 2017, 07:09 AM »
   You can get the Nils adapter from FishUSA
 Or a Novak Ice Master Drill adapter for Nils
Frank DeLuca

[email protected]

Offline Deal Ninja

  • Iceshanty Militia
  • Team IceShanty Maniac
  • *
  • Posts: 1,584
Re: Drill to auger adapter
« Reply #2 on: Nov 25, 2017, 08:30 AM »
Frank, is the adapter that prospector is using in this thread only available with the purchase of a Nils Trekker or can it be purchased somewhere separately?  All I’m seeing online is the regular Nils Drill adapter for the standard Auger that I purchased from FishUSA.

https://www.iceshanty.com/ice_fishing/index.php?topic=348773.msg3714276#msg3714276

Thanks!

DN
DON'T DILLY DALLY!!!   ;D

Polar Bird 3T, Eskimo EVO 1it
8" K-Drill, 8" Nils Arctic Trekker, Milwaukee Mud Mixer, Milwaukee 2704-22, Clam Plate, Adapters to make everything work with everything. lol
Marcum LX-7s (2) Dakota Lithium powered

Offline walleyeboater

  • Team IceShanty Addict
  • *
  • Posts: 608
Re: Drill to auger adapter
« Reply #3 on: Nov 25, 2017, 02:46 PM »
I'm less than impressed with the ice master adapter.
That cord will snap before u know it.
I've got 2 of them.
Could be that I'm doing it wrong .
Thx

Offline Sharp Nils

  • Iceshanty Sponsor
  • Team IceShanty Regular
  • *
  • Posts: 267
Re: Drill to auger adapter
« Reply #4 on: Nov 25, 2017, 09:34 PM »
  That is the cordless drill top for an Arctic Trekker.   Don't think they are sold separate but you could ask at NilsUSA.
Are you thinking about using this with a 28" Nils extension?
Frank DeLuca

[email protected]

Offline Deal Ninja

  • Iceshanty Militia
  • Team IceShanty Maniac
  • *
  • Posts: 1,584
Re: Drill to auger adapter
« Reply #5 on: Nov 26, 2017, 04:26 AM »
  That is the cordless drill top for an Arctic Trekker.   Don't think they are sold separate but you could ask at NilsUSA.
Are you thinking about using this with a 28" Nils extension?

Yes.  I was looking to set up an auger very similar to prospector’s, but with the 28” extension instead of the 14”.   I’ll contact FishUSA and/or Nils directly.

Thank you again!

DN
DON'T DILLY DALLY!!!   ;D

Polar Bird 3T, Eskimo EVO 1it
8" K-Drill, 8" Nils Arctic Trekker, Milwaukee Mud Mixer, Milwaukee 2704-22, Clam Plate, Adapters to make everything work with everything. lol
Marcum LX-7s (2) Dakota Lithium powered

 



Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.