Pages: 1 [2] |   Go Down

Author Topic: Mora vs K-Drill, Nils Eskimo  (Read 3799 times)

Offline Reginald Bonz III

  • Team IceShanty Regular
  • ***
  • Posts: 477
  • FLAG UP!!!
Re: Mora vs K-Drill, Nils Eskimo
« Reply #30 on: Feb 21, 2019, 08:56 AM »
They say that they will only sharpen three times. You really don't need to send them after every season unless you are hard on them.  Very easy to run a flat stone across edges. Don't forget the WD, especially at the end of the season.
Logged
Keep those holes clean and smooth

Offline earlyrise

  • Team IceShanty Regular
  • ***
  • Posts: 147
Re: Mora vs K-Drill, Nils Eskimo
« Reply #31 on: Feb 21, 2019, 10:32 AM »
I have a Mora hand auger, 6inch blades says made in Sweden. also a Tanaka gas 8inch the bottom comes off which is the blade both are dull. Where would I get these sharpened.
Logged

Offline hardwater diehard

  • Iceshanty Militia
  • Team IceshantyInsanity
  • *
  • Posts: 12,482
Re: Mora vs K-Drill, Nils Eskimo
« Reply #32 on: Feb 21, 2019, 11:02 AM »
Quote from: earlyrise on Feb 21, 2019, 10:32 AM
I have a Mora hand auger, 6inch blades says made in Sweden. also a Tanaka gas 8inch the bottom comes off which is the blade both are dull. Where would I get these sharpened.

FISH307..they do an exchange or will re sharpen yours

https://www.fish307.com/auger-blade-sharpening/
Logged
Give a man a fish he eats for a day .Teach a man to ice fish he has an obsession for a lifetime

Offline earlyrise

  • Team IceShanty Regular
  • ***
  • Posts: 147
Re: Mora vs K-Drill, Nils Eskimo
« Reply #33 on: Feb 21, 2019, 11:07 AM »
Thank you Hardwater
Logged
Pages: 1 [2] |   Go Up
 


Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.