Strikemaster to Nils adapter

[Mainedog]

Looking for a way to have my strikemaster 40v drive a Nils.
Has anybody done this? Is so how?

Thanks
MD

[hardwater diehard]

Think you will need two adapters

The Eskimo power auger adaptor  and

The a Clam to Nils adaptor

As long as your Nils is not Orange

[hardwater diehard]

I believe this one will get you from the 22mm power head to 18mm

https://geteskimo.com/collections/auger-accessories/products/pistol-bit-adapter

this one should get you from the 18mm to the Nils

https://shop.clamoutdoors.com/nils-auger-adapter-for-conversion-kit.html

going to have to do some research   

[Mainedog]

Thanks for the info. So the Strikemaster goes into the Eskimo adapter. The male end of the Eskimo would go in one end of the clam adapter, and the Nils would go into the other end of  the clam adapter? Just trying to visualize how it would all fit together.

I have a blue hand cranked Nils.

Thanks for your help.
MD.

[hardwater diehard]

Thanks for the info. So the Strikemaster goes into the Eskimo adapter. The male end of the Eskimo would go in one end of the clam adapter, and the Nils would go into the other end of  the clam adapter? Just trying to visualize how it would all fit together.

I have a blue hand cranked Nils.

Thanks for your help.
MD.

Yes ..you may want to verify that the Eskimo adapter is 22mm to 18mm ..the Clam female part is designed to go onto the Clam Plate output shaft which is 18 mm.

this maybe something to look into

https://www.surpluscenter.com/New-Arrivals/Ice-Auger-Adapter-w-Black-Oxide-Steel-Screws-for-Nils-USA-Augers-to-Trophy-Strike-or-Clam-120V-Powerheads-108708-1-5751-A.axd