Two People One Flasher

[jamesboyle63]

So I'm sitting around bored and hating the weather ( upper 40's New Years Eve night here in NEIllinois). I was thinking can two people use the same flasher at the same time. I was thinking if I drilled three holes say 2 feet apart and put the transducer in the middle hole would we be able to see both of jigs on one flasher. I kinda figure the depth of the water would make a difference , deeper water being better. Just a thought. Thanks in advance. Lets hope for some consistent colder temps for all.

[WildOutdoorAddict]

I do it with my Vexilar 22, most of the time you can see both jigs, but it also depends on how deep your fishing

[IM-POUNDING- R -U]

My Brother and i share a FL-20 Vexilar . Our holes are about 4 feet apart. Works great!

[chfishon]

My Brother and i share a FL-20 Vexilar . Our holes are about 4 feet apart. Works great!

I share with both my kids(one on either side)and it works great

[ice dawg]

So I'm sitting around bored and hating the weather ( upper 40's New Years Eve night here in NEIllinois). I was thinking can two people use the same flasher at the same time. I was thinking if I drilled two holes say 2 feet apart and put the transducer in the middle hole would we be able to see both of jigs on one flasher. I kinda figure the depth of the water would make a difference , deeper water being better. Just a thought. Thanks in advance. Lets hope for some consistent colder temps for all.

It would work great. All you have to do is figure out how to drill two holes and have one of them be the middle hole. 

[WildOutdoorAddict]

here is what I do most of the time

[Master79]

Was wondering this too. Anybody do this with the vexilar fl8. Just got it a month ago and hope it works for my son and I to use together

[WildOutdoorAddict]

Was wondering this too. Anybody do this with the vexilar fl8. Just got it a month ago and hope it works for my son and I to use together

You'd be fine they have a 19* ducer

[nonamer]

anything is better than nothing unless it is a dead hole on the other side of the stump.

[Rebelss]

Put a mirror on each side of the flasher, then put on ya 3D glasses....

[slamer58]

One of my favourite ways to fish with my kids...

[slipperybob]

Three hole method.   

[da man cave shack]

Just did it today with my ice-35 and both of ude could see our jigs fine.

[GrnDay33]

Ive done this lots of time...usually helps sell a few flashers to the guys who get to use the other hole...Plus its fun to see someone watch the wonders of sonar.

[filetandrelease]

i always fish 3 holes and the three hole method works and you don't have to handle the trans ducer when fighting a fish

[snuffcan]

Definately works with an x67. Small screen can get cluttered though.

[tinyfisher]

Yust make sure you don't think the other guys jig is a fish!  It can get to be a bit of a pain with two jigs down there both marking, but better than fishing blind.

[gearheart]

Done it with my old fl8 works good.  Only my buddy was too clueless to read the flasher and I had to coach him as well as watch mine.

[NEZ]

I do this with my Humminbird Ice 35.  I drill 3 holes in a triangular shape about 18 inches apart.  I put the transducer in one hole and each of us fish the other hole.  Works well.  Does get to be a pain if you both are fishing the same depth because the jigs are both marked at the same depth.

[WyoIceFish]

I do it all the time.  Three holes on 2 foot centers.  Transducer in center hole.  One jig just off the bottom and the other about 6-7 feet below the ice.  If you fish them both deep a fish can easily tangle your rods.  Works great and you can easily see both jigs.

[Melbs7]

I just say... i bet you wish you had a vex too.... LOL... Actually If im fishing with someone that doesnt have one, we just take turns using it... it also really sells them on buying one of their own, since they catch 2 - 3 times more fish using the flasher.....