IceShanty.com's Ice Fishing Community
Ice Fishing Tips -Check your local regulations! => Ice Fishing Safety => Topic started by: JPG on Dec 26, 2017, 09:34 PM
-
So, I got a nice set of picks but they roped together. No spring cord and I'd like to change that. I'd also like to attach them somehow to my striker suit. Kind of the same way the frabill suit is set up. Any suggestions as to the spring cord and attaching it to the striker suit? Thanks in advance for the input.
-
Grab something like this
(https://s10.postimg.cc/is71ovocl/484132293_016_1.jpg) (https://postimg.cc/image/is71ovocl/)
Take one of the key rings off and thread it through the loops on the front of the coat and figure out some way to attach it at the back of the neck (or somewhere).
Figure out a way to attach it to the picks (drill a hole and get really big rings?).
-
Those rings could be put right to the picks. But attaching to the coat...idk
-
Those rings could be put right to the picks. But attaching to the coat...idk
I guess depending on the model jacket, but I was envisioning using these:
(https://s10.postimg.cc/fa05cz685/image.png) (https://postimg.cc/image/fa05cz685/)
-
100% right. I have the predator. But I i have clippers on one and another tool on the other. I guess I can't have the best of both worlds. Idk.
-
100% right. I have the predator. But I i have clippers on one and another tool on the other. I guess I can't have the best of both worlds. Idk.
You're just feeding the line for the picks through those, Should still be able to hook to them with some room to spare.
If not, get a retractable lanyard with a small clip like this one to hook your tools to, and clip it to the rings on the coat. Should give you enough spare room to work with.
(https://s10.postimg.cc/dtxtmm7vp/61u1_XR6_HKL._SY355_1.jpg) (https://postimg.cc/image/dtxtmm7vp/)
-
Mine are attached buy a springy cord...
But they also fit into each other, forming a "necklace"...
I wear it like a mc hammer chain, too legit to quite yo...
<°)))>{
-
mine are on a cord. fit into each other hang right in front on my chest easy to get to.
Keep it safe! JDL
-
So, I got a nice set of picks but they roped together. No spring cord and I'd like to change that. I'd also like to attach them somehow to my striker suit. Kind of the same way the frabill suit is set up. Any suggestions as to the spring cord and attaching it to the striker suit? Thanks in advance for the input.
How about a small cheap rubber band ...loop through the D-ring and onto/around the pick's handle ..then when needed just grasp and pull breaking the rubber band... its all in the cheap rubber band must be able to break w/o much effort.
-
Thanks for the ideas fellas. They're all good. If I can get those retractable key chains long enough, I might just use those straight to the pick.
-
I put the ice picks in my long sleeve thermo under garment. Run the cord down my arm as I get dress. Stopping at my wrist. Easy access. I fell through the ice several years ago. All I had to do is pull the pick from the cuff of my sleeve. Can't loose them because there attached to your body. It was easy getting back on to the ice using them.
-
Yes. that is what I do now. I run the rope around my back, through the sleeves and they dangle from my wrists. I don't mind it so much, just wanted to get away from the dangling part. I feel like they're going to get in the way although they never have.
-
I run them around my neck before I put on the striker coat and tuck into the top of my bibs with the end sticking up. I can get at them quickly if I go in and they are out of the way.
-
This is what I did for my rods and paddles on my yak but it should work for your picks
making rod leash from trimmer line
-
Not a bad idea
-
They work great for leashes and you could modify the length to suite your needs.
-
I learned something today ;D
-
you have helped me a lot on here HD, was only a matter of time before I could return the favor
-
you have helped me a lot on here HD, was only a matter of time before I could return the favor
Audience participation is key to this site :flex: :flex: :flex:..like I tell so many new members that SEARCH function is quite a resource...so many members have helped me w/o even knowing they had via past post/threads ...some time going years back ..reviews on products ...known issues with product...etc.
-
:thumbsup: :thumbsup: :thumbsup:thanks allot for sharing that was really cool will be trying to make some stickhick
-
Glad to hear it. They are really slick. Best of luck and tight lines
-
Just pick up some paracord at your local hardware shop. It shouldn't be too hard to make a clinch knot to the paracord to the remaining line.
-
It's also possible to tie a type of knot that pulls out easily under tension. I don't know what it's called and it hard to describe. Maybe someone else knows---I'll try googling it.
-
It's also possible to tie a type of knot that pulls out easily under tension. I don't know what it's called and it hard to describe. Maybe someone else knows---I'll try googling it.
Bowline
<°)))>{
-
Here we go---just tie a whole bunch of these to shorten the rope/line.