Pages: [1] |   Go Down

Author Topic: Ice Point on Eskimo Auger  (Read 693 times)

Offline hartly

  • IceShanty Rookie
  • **
  • Posts: 97
Ice Point on Eskimo Auger
« on: Mar 12, 2018, 11:01 PM »
Guys is it possible to fix the ice point on my auger if its wiggles side to side? I've tried tightening it with no luck. The loose Ice Point was causing my auger to wobble when drilling holes this past weekend.
Logged

Offline lefty2053

  • Team IceShantyholic
  • ***
  • Posts: 7,969
Re: Ice Point on Eskimo Auger
« Reply #1 on: Mar 13, 2018, 05:10 AM »
Might need a new one. They sell them on Geteskimo.com
Logged
<===Lefty===

Offline calgarygringo

  • Team IceShanty Regular
  • ***
  • Posts: 121
Re: Ice Point on Eskimo Auger
« Reply #2 on: Mar 13, 2018, 07:50 AM »
Not another issue......I have never had an issue with the point. Maybe take it out and re insert the plastic insert and retighten. The insert helps keep it in there. Other than that go shopping for another.


Quote from: lefty2053 on Mar 13, 2018, 05:10 AM
Might need a new one. They sell them on Geteskimo.com
Logged

Offline hartly

  • IceShanty Rookie
  • **
  • Posts: 97
Re: Ice Point on Eskimo Auger
« Reply #3 on: Mar 14, 2018, 12:19 PM »
Quote from: calgarygringo on Mar 13, 2018, 07:50 AM
Not another issue......I have never had an issue with the point. Maybe take it out and re insert the plastic insert and retighten. The insert helps keep it in there. Other than that go shopping for another.

Its really wasn't an issue . I just tightened the nut and bolt and now shes rock solid :)
Logged
Pages: [1] |   Go Up
 


Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.