Please welcome Eyoyo Underwater Fishing Cameras.https://amzn.to/3siEgXn
I've used the flat Mora blades Swedish made and the directions that came with the blades said not to sharpen the flat side. You have to sharpen the angel, I've used a file and stones,the file is quicker. I found that if I didn't take the nicks out they still didn't cut well.Stone the flat lightly to remove any burres. Buy a new set in case the sharpened ones don't cut.If you have a different way that works keep doing it. Good luck.
while we are on the subject of blades, I bought a pair at the end of last season and only used it twice this year and the problem that I'm having is that the blades are sliding and not biting into the ice. any suggestions on how to fix this problem. shims??? on both blades or one side??? thanks in advance
Wiener,I can't seem to find the jig you are mentioning. Do you have a link to the page? Thanks.I have found this type and that type but not a jig in the sense I am meaning.I suppose I could try my knife sharpening kit similar to (cheaper than) this one (but with only 3 stones) on my old blades to see if I can master it enough to make them cut decently.Also I am not about to spend what they want for this one considering I don't have what it mounts to to use it. Yikes! even MO-MONEY!!
Go to fish 307 they have a blade exchange thats cheap and easy. Under 8 inch is 10.00 bucks and 8 inch or bigger is 12.00 . If you have blades from china throw them out cause they are junk, get the ones from sweden.