Author Topic: How many holes do you drill?  (Read 7768 times)

Offline GRIZZ08

  • Team IceShanty Regular
  • ***
  • Posts: 165
How many holes do you drill?
« on: Sep 18, 2013, 01:00 PM »
i have been seeing that many people are asking about buying power augers with the season coming up, and i see alot a people posting that they can get away with just using a hand auger or a drill adaptor on a hand auger.  i dont know about most people but for me i would have to carry like 10 batteries with me as i tend to drill tons of holes.  i am just curious as to how many holes people drill and what species of fish they are targeting???

i would say that on a weekend trip i make in south dakota chasing perch i have no issues at all drilling 200-250 holes in one hole day of fishing thats fishing with about 6-10 guys, unless we find them right away and they dont move very much.
some days I can drink a lot of beer and other days only a case

Offline stripernut

  • Team IceShanty Maniac
  • **
  • Posts: 3,976
  • Tight Lines!
Re: How many holes do you drill?
« Reply #1 on: Sep 18, 2013, 01:08 PM »
For me, Bass, Perch, Pike, Trout, I drill for myself 50-100 holes with a 6 inch hand auger. In MA we are allowed 5 lines, so most days, 4 tilts (traps) and 1 for jigging... Rules of thumb for me is jigging 3 minute a hole and 45 minutes for a tilt, with out a fish, then I move on. Unless I am feeling lazy that day...

Offline perchnut

  • Team IceShanty Addict
  • *
  • Posts: 926
  • Love to catch those fatties....
Re: How many holes do you drill?
« Reply #2 on: Sep 18, 2013, 01:30 PM »
Usually its my dad and I, sometimes one other person. Dad isnt as mobile as me, so when i find fish, i usually put him on it.  We also can fish 5 lines each.  I use an Ice Gator, and Id say on Average, I probably pop 50 holes or so.  We fish perch and walleye.  Also, last year, the thickest Ice we had was around 8-109 inches, and that was right at the end of the season.  Most of the year, we were on 4-6 inches of ice. 

Offline toofuss

  • Team IceShanty Maniac
  • **
  • Posts: 1,183
  • stick 'em
Re: How many holes do you drill?
« Reply #3 on: Sep 18, 2013, 01:32 PM »
I have some days when i feel like i never put the auger down. Other days i might drill a dozen then stop. It mainly depends on the body of water im on and what fish im targeting.

I was on a bus and just happened to be sitting on a news paper. This guy came up and asked. "Are you reading that ?"
I said  yes, stood up, turned the page and sat back down.

Offline Rebelss

  • Iceshanty Militia
  • Team IceshantyInsanity
  • *
  • Posts: 16,106
  • Inventor of Minnow Magic American Patriot
Re: How many holes do you drill?
« Reply #4 on: Sep 18, 2013, 01:35 PM »
Usually its my dad and I, sometimes one other person. Dad isnt as mobile as me, so when i find fish, i usually put him on it.  We also can fish 5 lines each.  I use an Ice Gator, and Id say on Average, I probably pop 50 holes or so.  We fish perch and walleye.  Also, last year, the thickest Ice we had was around 8-109 inches, and that was right at the end of the season.  Most of the year, we were on 4-6 inches of ice. 

Boy, that's some thick ice!!!!  :roflmao: Just kiddin'.... ;D
“The mass of men live lives of quiet desperation”  Thoreau

Offline r3kenned

  • Team IceShanty Regular
  • ***
  • Posts: 189
Re: How many holes do you drill?
« Reply #5 on: Sep 18, 2013, 01:43 PM »
Some lakes I know exactly where to go for pike or panfish…thank you GPS…and I only have to drill 2 holes (Michigan only allows 2 lines per man) and will kill them all day.  Last season I landed 52 pike in a weekend and only cut about 6 holes.  Caught my limit in perch with only cutting 2 holes on another outing as well. 

Other lakes I will end up chasing the fish and will drill 30-40 in a day.  If I am fishing a lake for the first time, I just expect to have to try about 40 holes before landing a fish.  Mostly looking for good weed cover and depth.  My usual rule is 15 minutes on a new lake or new spot without a fish and I move (45 minutes if the ice is really thick or the weather is nasty).  I use a 7” hand auger, but I am planning on buying the 8” Jiffy pro4 before the season starts.  I don’t know if having a power auger up my drilling or not…

200-250 holes in a day sounds like a ton, but if you have 6-10 guys with you and have to look for the fish, this sounds about right to me.

Offline hardwater diehard

  • Iceshanty Militia
  • Team IceshantyInsanity
  • *
  • Posts: 12,477
Re: How many holes do you drill?
« Reply #6 on: Sep 18, 2013, 01:46 PM »
I drill in a "wagon wheel " pattern ....5 holes out 30 or so yards ...return "spoke" to center and so on ....  for t total of 25 or more holes ..covering shallow and deep  ...structure ...non structure . Place my traps sporadically in the "spokes". Jig the other holes . Based on the activity of the day  ill drill more holes with my second wind in similar depth/structured areas that have produced .....by days end ....no sign of that "wagon wheel " pattern . 
Give a man a fish he eats for a day .Teach a man to ice fish he has an obsession for a lifetime

Offline krcat40

  • Team IceShanty Regular
  • ***
  • Posts: 293
Re: How many holes do you drill?
« Reply #7 on: Sep 18, 2013, 02:06 PM »
Some lakes I know exactly where to go for pike or panfish…thank you GPS…and I only have to drill 2 holes (Michigan only allows 2 lines per man) and will kill them all day.  Last season I landed 52 pike in a weekend and only cut about 6 holes.  Caught my limit in perch with only cutting 2 holes on another outing as well. 

Other lakes I will end up chasing the fish and will drill 30-40 in a day.  If I am fishing a lake for the first time, I just expect to have to try about 40 holes before landing a fish.  Mostly looking for good weed cover and depth.  My usual rule is 15 minutes on a new lake or new spot without a fish and I move (45 minutes if the ice is really thick or the weather is nasty).  I use a 7” hand auger, but I am planning on buying the 8” Jiffy pro4 before the season starts.  I don’t know if having a power auger up my drilling or not…

200-250 holes in a day sounds like a ton, but if you have 6-10 guys with you and have to look for the fish, this sounds about right to me.
Isn't MI 3 lines per man? If its not all of us have been breaking the law for a long long time.

Offline Fontona19

  • Team IceShanty Maniac
  • **
  • Posts: 1,113
Re: How many holes do you drill?
« Reply #8 on: Sep 18, 2013, 02:08 PM »
The short answer is as few as possible.

I don't think I have ever contemplated how many holes I was going to cut, or how many I should cut. I cut as many as it takes. If that is 200 or 2.

I have many places I know where to fish and I don't have to search, and places I am not very familiar with and it looks like swiss cheese when I leave. 

Offline r3kenned

  • Team IceShanty Regular
  • ***
  • Posts: 189
Re: How many holes do you drill?
« Reply #9 on: Sep 18, 2013, 02:09 PM »
Isn't MI 3 lines per man? If its not all of us have been breaking the law for a long long time.

I could be wrong.  I was always told 2 lines per man.  I will have to look at the DNR website again and get back to you.  If it is 3 lines that is great news for me!

Offline krcat40

  • Team IceShanty Regular
  • ***
  • Posts: 293
Re: How many holes do you drill?
« Reply #10 on: Sep 18, 2013, 02:15 PM »
Just looked on dnr site it is three for sure! More lines means more fish for you guys.

Offline r3kenned

  • Team IceShanty Regular
  • ***
  • Posts: 189
Re: How many holes do you drill?
« Reply #11 on: Sep 18, 2013, 02:26 PM »
Just looked on dnr site it is three for sure! More lines means more fish for you guys.

I found it too.  Wow so glad you pointed that out to me!  This must have changed some time in the past and I never looked it up.  Thank you so much!  Who knows how many years I have been fishing only 2 lines when I could have had 3.

Offline GRIZZ08

  • Team IceShanty Regular
  • ***
  • Posts: 165
Re: How many holes do you drill?
« Reply #12 on: Sep 18, 2013, 02:28 PM »
i would like to say i drill as few as i can but for some reason when i pick up the auger i cant stop ill go out with one other guy to a local lake i fish alot and know where to go and ill drill 20 holes before i even think about picking up a rod might not fish them all but if im not marking fish off to a new hole i go.  this way i dont have to drill a couple more if the fish move outside there normal zone
some days I can drink a lot of beer and other days only a case

Offline neveruminda

  • Team IceShanty Addict
  • *
  • Posts: 836
  • Owe No Man Anything...
Re: How many holes do you drill?
« Reply #13 on: Sep 18, 2013, 03:10 PM »
Trout (with those waterproof smart phones used to communicate how best to evade fishermen)

2x Lines max here so 2x holes - average per outing is 2x to 8x holes in 20"+ ice at height of season

Showdown 5.6 dual beam sonar (through clear ice) helps quite a bit to see structure & depth before drilling.  I just carry bottle of water, drop approx. 1TBSP and quickly set down puck - don't leave it there long in cold temps; otherwise find the chisel
Owe No Man Anything...

Offline DR.SPECKLER

  • Team IceShantyholic
  • ***
  • Posts: 9,130
  • find your own fish..
Re: How many holes do you drill?
« Reply #14 on: Sep 18, 2013, 04:27 PM »
ive got lucky a few times and drilled 1 hole and caught limits of fish or I also have drilled 50 and caught nothing.but on average about 25 holes a day.

Offline BRIFISH

  • Team IceShanty Regular
  • ***
  • Posts: 162
Re: How many holes do you drill?
« Reply #15 on: Sep 18, 2013, 04:36 PM »
Most places i fish are small ponds and i know where they are, but in a new pond i just play hide and seek and start drilling holes in a tight zig-zag pattern till i find what i want.  Looking forward to getting a graph with gps so i can mark structure all summer and then start the search at those points.  So I would say prolly 10-20 holes when i am having trouble locating fish. 

Offline gearheart

  • Team IceShanty Addict
  • *
  • Posts: 920
Re: How many holes do you drill?
« Reply #16 on: Sep 18, 2013, 06:01 PM »
When the ice gets to be 18"and better the gas auger comes out.  Less than 18 i can hand crank 5-6 holes without breaking out a sweat and after fishing those holes for a half hour I'm good for more holes.  My 6" mora III with the curved blades cuts through the ice like it was hot butter. We're only allowed 2 lines at a time in Ontario. 

Offline delta9

  • Team IceShanty Maniac
  • **
  • Posts: 1,222
  • hard water is great
Re: How many holes do you drill?
« Reply #17 on: Sep 18, 2013, 06:58 PM »
Hand auger here 6 inch mora, I usually get 20 to 30 holes an outing.
:icefish:

Offline stripernut

  • Team IceShanty Maniac
  • **
  • Posts: 3,976
  • Tight Lines!
Re: How many holes do you drill?
« Reply #18 on: Sep 18, 2013, 09:03 PM »
Great Posts! Lots of good info!

Offline da man cave shack

  • Team IceShanty Maniac
  • **
  • Posts: 2,551
  • Drillin for a thrillin.
Re: How many holes do you drill?
« Reply #19 on: Sep 18, 2013, 09:50 PM »
75 a weekend at most.


Offline michianafisherman

  • Team IceShanty Maniac
  • **
  • Posts: 2,687
  • Pleasant Times At Pleasant Lake
Re: How many holes do you drill?
« Reply #20 on: Sep 19, 2013, 05:05 AM »
200-250 holes in one hole day of fishing?


If I counted all of the holes made by other fisherman, on the lakes I fish, they would not add up to that many holes the entire season.

HELD HOSTAGE BY PHOTOBUCKET

Offline krcat40

  • Team IceShanty Regular
  • ***
  • Posts: 293
Re: How many holes do you drill?
« Reply #21 on: Sep 19, 2013, 06:58 AM »
200-250 holes in one hole day of fishing?


If I counted all of the holes made by other fisherman, on the lakes I fish, they would not add up to that many holes the entire season.
Come on

Offline chuckrudy

  • Team IceShanty Addict
  • *
  • Posts: 543
Re: How many holes do you drill?
« Reply #22 on: Sep 19, 2013, 07:48 AM »
So many holes that's unbelievable :tipup: :icefish:

Offline jethro

  • Team IceShanty Maniac
  • **
  • Posts: 4,128
Re: How many holes do you drill?
« Reply #23 on: Sep 19, 2013, 08:05 AM »
250 in a day? That's crazy. I would say on most days I drill around 25 holes, sometimes 40. If I fish by myself it's possible that I will drill 8-10 holes or so.
Quote- fishslap: I use a variety:  whistlin' bungholes, spleen splitters, whisker biscuits, honkey lighters, hoosker doos, hoosker don'ts, cherry bombs, nipsy daisers, with or without the scooter stick, or one single whistlin' kitty chaser

Ice safety link: http://lakeice.squarespace.com/

Offline GRIZZ08

  • Team IceShanty Regular
  • ***
  • Posts: 165
Re: How many holes do you drill?
« Reply #24 on: Sep 19, 2013, 08:09 AM »
sounds like alot and it is but when you have 6-10 guys and we are all the type that we walk around and dont fish a hole if we dont mark fish after we have found a spot that has fish.  most of the time searching the holes are like 20 yards apart then when we find them they can be as close to 20 feet apart and you just chase the school around all your holes
some days I can drink a lot of beer and other days only a case

Offline DR.SPECKLER

  • Team IceShantyholic
  • ***
  • Posts: 9,130
  • find your own fish..
Re: How many holes do you drill?
« Reply #25 on: Sep 19, 2013, 08:10 AM »
sound like hes in the swiss cheese brigade.haha.whatever gets ya on the fish.

Offline iceskavenger

  • IceShanty Rookie
  • **
  • Posts: 13
Re: How many holes do you drill?
« Reply #26 on: Sep 19, 2013, 09:13 AM »
I drill about 50-60 a day. Like everyone I drill until I find the fish. 45 minutes for tip ups for pike.  I do this until I target fish.

Offline squ1rr31_

  • IceShanty Mod Team
  • Team IceShanty Maniac
  • *
  • Posts: 1,401
  • Addicted to freezing.
Re: How many holes do you drill?
« Reply #27 on: Sep 19, 2013, 09:18 AM »
Nothing wrong with drilling a ton of holes, just don't get mad if people use them, it comes with the territory.
  

Offline fishlessman

  • Team IceShanty Maniac
  • **
  • Posts: 1,446
Re: How many holes do you drill?
« Reply #28 on: Sep 19, 2013, 10:13 AM »
pretty much everyone i fish with brings their own auger. maybe 2 doz holes max for me in a day. only time i cut more is if im by myself and jigging for lake trout, i pretty much keep moving if its nice out

Offline Bearsfan

  • Team IceShanty Addict
  • *
  • Posts: 785
Re: How many holes do you drill?
« Reply #29 on: Sep 20, 2013, 10:05 AM »
Nothing wrong with drilling a ton of holes, just don't get mad if people use them, it comes with the territory.

Well said.

 



Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.