Author Topic: Nimrod adaptor and handle  (Read 652 times)

Offline SirCranksalot

  • Team IceShanty Maniac
  • **
  • Posts: 1,652
Nimrod adaptor and handle
« on: Feb 24, 2018, 05:16 PM »
Anybody use 1 of these? Would seem to be an alternative to a Clam plate.

https://www.amazon.com/NIMROD-TONSH-Nimrod-Smart-Handle/dp/B008KJ5T36
Keep yer stick on the ice!

Offline 3300

  • Team IceShantyholic
  • ***
  • Posts: 7,631
  • Michigan Moderator.Not affiliated with MarCum Tech
Re: Nimrod adaptor and handle
« Reply #1 on: Feb 24, 2018, 11:24 PM »
i wouldn't use a system like that. you need both hands on the drill using the auxiliary handle that came with the drill. no plate needed.
nimrod makes one w/o the handle also.
i use kovac icemaster adapter and it has saved my augers lots of times because of the bungee cord system.

this one is in stock and w/o the killer handle
https://www.amazon.com/Lakco-Nimrod-Auger-Adapter-Card/dp/B001AMJ3HS/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1519573857&sr=1-1&keywords=Nimrod&dpID=21xCRrFO1dL&preST=_SY300_QL70_&dpSrc=srch

Offline silverado23

  • IceShanty Rookie
  • **
  • Posts: 62
Re: Nimrod adaptor and handle
« Reply #2 on: Feb 25, 2018, 05:24 AM »
Yes. Nimrod works well.  However, after 4 seasons sheared off the shaft that goes into the drill chuck.  Replaced with clam plate. 

Offline lefty2053

  • Team IceShantyholic
  • ***
  • Posts: 7,969
Re: Nimrod adaptor and handle
« Reply #3 on: Feb 25, 2018, 05:53 AM »
Looks a lot like the handle that comes with the Nero Mini. It works until you get stuck on the bottom of a hole or drill at an angle and then it wrenches your wrist. Like 3300 say's you need both hands on the drill so this doesn't happen. My Handle like that is in my desk drawer.
<===Lefty===

 



Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.