Author Topic: Ion auger mod  (Read 871 times)

Offline flyboy

  • Team IceShanty Regular
  • ***
  • Posts: 166
Ion auger mod
« on: Feb 26, 2018, 06:57 PM »
I was getting frustrated with my 2014 ion drill, as unlike newer models, it did not come with a center spike. I picked up a replacement spike for the Eskimo drill at Cabela's. In order to retrofit it to the ion, you have to drill out the centre of the auger shaft, also you have to drill a #11 hole cross ways to retain the new spike. Very happy with the results. Plan on testing it on the ice at Dief. on Wednesday.  Flyboy
The worst day fishing is better than the best day at......heck! you guys already know that!

Offline Eddie Spaghetti

  • Team IceShanty Maniac
  • **
  • Posts: 2,039
Re: Ion auger mod
« Reply #1 on: Feb 26, 2018, 07:14 PM »
That is a good idea. I hope this mod works for you.

Offline ToonFisher

  • Team IceShanty Addict
  • *
  • Posts: 529
Re: Ion auger mod
« Reply #2 on: Feb 26, 2018, 07:35 PM »
My guess is that it may starts better with blunt blades but also gets stuck more often in deep hole.

Offline flyboy

  • Team IceShanty Regular
  • ***
  • Posts: 166
Re: Ion auger mod
« Reply #3 on: Feb 26, 2018, 08:01 PM »
The spikes only purpose is to keep the auger centered. I always keep my blades sharp. I have never got my ion stuck. Flyboy
The worst day fishing is better than the best day at......heck! you guys already know that!

 



Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.