Ice Fishing Tips -Check your local regulations! > Jigging
Knot useage
(1/1)
maddogg:
When jigging for panfish with tungsten jigs which knot do you prefer to use. A loop knot or a knot that is tight to the jig.
appleye:
I use both. I usually start with a loop knot and if the fish on graph flare away I assume it's too much movement then got to a clinch knot to make less movement of the jig. I normally have a rod with one of each.
DR.SPECKLER:
I use the loop knot alot these days.i got sick of repositioning a horizontal jig using the clinch knot.the surgeon loop or rapala knot has better jig action and fiskas or amped jigs balance perfectly.
Rebelss:
I've always used the Rapala knot with little issue.....
fishinpwk:
This knot works, used it before.
My favorite is the uni-knot for a loop. Cinch down to hook eye, but don't tighten it. Pull the tag end instead to finish. Creates a loop or size a predetermined loop and tighten from there. Works great.
Depending on line size and material (mono, flouro, etc) knot will slip and cinch at hook eye or stay locked.
Fished with a guide using heavy p-line leader and a three turn uni-knot with small loop at jig eye. Knot didn't budge after landing multipe big lakers that day. Biggest being a 31 lber.
Navigation
[0] Message Index
Go to full version