IceShanty.com's Ice Fishing Community
Ice Fishing Tips -Check your local regulations! => Equipment => Ice Augers => Topic started by: saskbucks on Dec 03, 2021, 06:39 AM
-
Hey All,
I lost my Pistol bit screw that attached the top chuck and guard plate. Do I have to get a replacement from Ardisam or would I be able to find a replacement at a hardware store? Thanks.
-
Here is a parts list for the 6"......https://ardisam.com/parts/structure/2426 Looks like all standard go to the hardware store and get.
The same site has an 8 " parts list if anything is different.
-
BOLT 1/4-20 X 1 SHCS GR8 BLK ZN F-T
could go longer and add a nylon locking nut and/or blue LOCTITE
-
Put a drop of Loctite on that new bolt too....and get a grade 8 galvanized one. No, not all are, either. ;)
-
Thanks all. Appreciate the help!
-
If you are going the bolt and nylon lock nut ..As you may not be able to find a long enough allen type bolt..if so I would add a spacer in the recessed part of the auger .
-
I know this topic is old but I figured I'd add to it.
I just came up with a replacement wing bolt to replace the Factory Allen head screw. Feel free to message me for details.
(https://i.postimg.cc/JsbYnKVH/20240201-100941.jpg) (https://postimg.cc/JsbYnKVH)
-
Wing bolts love Hoodie strings, , I've always got rid of em & used self tapping/ flush mount sheet metal screws through the auger collar.