IceShanty.com's Ice Fishing Community
Ice Fishing Tips -Check your local regulations! => General Tips => Topic started by: SLAYERFISH on Dec 09, 2014, 04:27 PM
-
My bro uses these. They actually work quite well.
(http://img.photobucket.com/albums/v615/slayerfish/Mobile%20Uploads/NCM_0411_zps9bc2c56c.jpg)
-
Nice -- Simple and effective. Is the end duct-taped to the rod? ;)
-
Nice -- Simple and effective. Is the end duct-taped to the rod? ;)
Oh yeah-
-
Red for Sure....but pure Genius too!
-
Stop showing this kind of thing,you are going to give us Coloradans a bad name.RED NECK
-
NOT MADE IN CHINA ............ YET !!
-
NOT MADE IN CHINA ............ YET !!
The hanger and duct tape were....... I bet!! :-\
-
I have at least 200 rod holders at my house then!
-
Nice
-
Slayer-- It looks like you and your brother practice Paleo Ice Fishing. The ingenuity of early Man. It looks like if you got out the needle nose you could do a little over/under wire bending and eliminate the duct tape. Sell the idea to Frabill and retire.
-
Slayer-- It looks like you and your brother practice Paleo Ice Fishing. The ingenuity of early Man. It looks like if you got out the needle nose you could do a little over/under wire bending and eliminate the duct tape. Sell the idea to Frabill and retire.
Yeah but it just ain't red enough without the duct tape!
Besides the tape method requires no tools or thought-
-
Don't they have designer Duck tape in multiples of colors?
-
Duct tape and rubber cement...fixes anything!!!
-
one of the best,simpliest tools ever :bow:
-
In the words of Red Green "we cut back on our duct tape usage and our explosion rates as well, one we figured out that propane connections were left-handed thread."
-
Yeah but it just ain't red enough without the duct tape!
Besides the tape method requires no tools or thought-
before I started using castration rings I used duct tape for fastening my reels on my cheap China rods. A correctly balanced spring bomber and they'll do the trick
-
I have at least 200 rod holders at my house then!
201 most likely if you have a vacuum use the little acc. piece that is used on chairs etc. perfect angle and just enough edge you can screw it right on your flipover sled.
-
There must be a youtube clip on it!