IceShanty.com's Ice Fishing Community

Ice Fishing Tips -Check your local regulations! => Equipment => Ice Augers => Topic started by: An2wan on Feb 20, 2019, 12:16 PM

Title: Jiffy fuel mix ratio
Post by: An2wan on Feb 20, 2019, 12:16 PM

My jiffy calls for 24:1, 3.5 hp legend series. Question has or is anyone running amsoil 80:1 or 100:1 in there’s? Thanks

Title: Re: Jiffy fuel mix ratio
Post by: Alex Delarge on Feb 20, 2019, 04:21 PM

I run Amsoil Sabre Pro. I mix it @ ~ 75:1. The 24:1 mix that jiffy use to recommend was for dino oil. I would think most 2-cycle oils these days can run 40 or 50:1 and full synthetic 2-cycle can probably run @100:1 but I like to dial it back a bit.

Title: Re: Jiffy fuel mix ratio
Post by: An2wan on Feb 20, 2019, 07:25 PM

Cool thanks

Title: Re: Jiffy fuel mix ratio
Post by: 77tech on Feb 23, 2019, 11:05 PM

If you go to the Jiffy web site they now recommend a 40:1 mix with their oil for all of the older Tecumseh engines.  I just use the 50:1 I have mixed up for my Stihl string trimmer.

Title: Re: Jiffy fuel mix ratio
Post by: Iceattic on Feb 24, 2019, 03:20 AM

I run tru- fuel 50,1 It's in a can All Ready to go.