The Dark House Spearing board is sponsored by:

Author Topic: Weighting,tuning, and DIY decoys in general  (Read 3814 times)

Offline rambo51

  • Team IceShanty Regular
  • ***
  • Posts: 337
Weighting,tuning, and DIY decoys in general
« on: Jan 09, 2019, 12:01 PM »
For the last couple years I have been getting into pike spearing more and more and have always used store bought decoys or live suckers. So I figured why not try attempting to make my own decoys? I enjoy building stuff and I have all the tools to do so. And here are my first couple attempts.. Now I have searched high and low for tips and tricks to getting the decoys to sit right and to swim, but I haven't had much luck finding anything so I just poured enough lead to make them sink and guessed where to put the eye hook. And they both sit pretty much level in the water and I figure that it's good enough? The fins are made of sheet metal so they are easy to bend and I will do some adjustments under the ice. I guess my question is how important is to have them sit perfectly level in the water and how do you guys know how much lead and where to put it in the decoy? Also what about the eye hooks how do you know where to put those also? Lots of questions and I appreciate any help. Thank you!










~~~We Fish For The Fish That Eat The Fish You Fish For~~~
                    -MudbuM Boys

Offline esox_xtm

  • Iceshanty Militia
  • Team IceShantyholic
  • *
  • Posts: 6,055
  • It's Showtime!
Re: Weighting,tuning, and DIY decoys in general
« Reply #1 on: Jan 09, 2019, 12:42 PM »
My Grand-Dad started carving bass plugs back in the 40's. His favorite tool for checking finished products was the bathtub. I think that tub saw more lures than bare bottoms for a couple decades.  ;)

Seriously, I've started tinkering with some stuff I'd like to clearly see how it falls in the water column. I'm on the hunt for a tall aquarium at the second hand stores. That way I can fill it and leave it, it'll always be ready when I have the desire.

I can't help with general starting points but finding the balance point will be valuable. Rest it on a round dowel or pencil or tape some string to it and observe how it hangs in the air. The other thing about wood is there's no two pieces alike so if you get one you like and make a second it'll be close but still require fine tuning to get it just right.
To fish or not to fish? That's a stupid question!



“Imagination is the only weapon in the war against reality.”― Lewis Carroll

Offline Bucket Rump

  • Iceshanty Militia
  • Team IceShanty Addict
  • *
  • Posts: 907
Re: Weighting,tuning, and DIY decoys in general
« Reply #2 on: Jan 09, 2019, 08:20 PM »
Here's a webpage that I came upon when reading up on spearing.

http://www.mi-darkhouse.org/weighing-your-fish-to-swim.html

I brought home my Father-In-Law's old spear a couple weeks ago and it's beginning to whisper to me....


Offline rambo51

  • Team IceShanty Regular
  • ***
  • Posts: 337
Re: Weighting,tuning, and DIY decoys in general
« Reply #3 on: Jan 09, 2019, 08:48 PM »
Thank you for the link! It sounds like a lengthy process and probably gets easier the more a guy does. Guess I will just have to keep making more of them.. Darn.. ;D


~~~We Fish For The Fish That Eat The Fish You Fish For~~~
                    -MudbuM Boys

Offline Martian

  • Team IceShanty Addict
  • *
  • Posts: 817
Re: Weighting,tuning, and DIY decoys in general
« Reply #4 on: Jan 30, 2019, 11:35 AM »
 I really need help on this, I made about 25 this year, they all look fairly good, about 10 of them are good, but some do not swim at all, in fact, one, ( which is pretty funny ) swims perfect , backwards. which I guess really doesn't matter

Offline Martian

  • Team IceShanty Addict
  • *
  • Posts: 817
Re: Weighting,tuning, and DIY decoys in general
« Reply #5 on: Jan 30, 2019, 11:37 AM »
 also, go to you tube,I found some info there, ( for next year) and on ebay, I actually found a book a guy made, that takes you the whole distance , carving, weighting, painting , $20

Offline Martian

  • Team IceShanty Addict
  • *
  • Posts: 817
Re: Weighting,tuning, and DIY decoys in general
« Reply #6 on: Jan 30, 2019, 11:38 AM »
 also, go to you tube,I found some info there, ( for next year) and on ebay, I actually found a book a guy made, that takes you the whole distance , carving, weighting, painting , $20

Offline Martian

  • Team IceShanty Addict
  • *
  • Posts: 817
Re: Weighting,tuning, and DIY decoys in general
« Reply #7 on: Feb 08, 2019, 03:52 PM »
 I would also like to figure out how they weight rollers

 



Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.