The Iceshanty Ice Auger Board is sponsored by
Nils Master Authorized Sharpening Service

Author Topic: Barracuda plus 3 horse power Tecumseh engine correct spark plug  (Read 181 times)

Offline fisherkrol

  • IceShanty Rookie
  • **
  • Posts: 36
Hey there team ice shanty...need to verify if someone can tell me the correct original spark plug for this auger.  I feel like it has been messed with quite a bit before I got it and I changed the carb but unsure it has the right plug.  What is in it now is a champion RJ17l M.  Thanks!!!

Offline DR.SPECKLER

  • Iceshanty Militia
  • Team IceShantyholic
  • *
  • Posts: 7,233
  • find your own fish..
Thats the correct plug but i would cross reference that to a ngk plug.ngk runs better in 2 cycles than champions.

Offline fisherkrol

  • IceShanty Rookie
  • **
  • Posts: 36
thanks!... i have seen the NGK B4LM but others as well...does that sound right?

Offline DR.SPECKLER

  • Iceshanty Militia
  • Team IceShantyholic
  • *
  • Posts: 7,233
  • find your own fish..
Br4lm or b4lm will work.its just one has the screw off top and the other is fixed.r stands for resistor I believe.

Offline Rebelss

  • Iceshanty Militia
  • Team IceshantyInsanity
  • *
  • Posts: 11,000
  • Inventor of Minnow Magic Muckletonian Society
I'd stick with the B4LM gapped at .030

                                    


"Seems like time is here and gone".....Doobies

 



Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.