Please welcome Eyoyo Underwater Fishing Cameras.https://amzn.to/3siEgXn
i have the firmware your running now if you want a copy so you can go back to it if you don't like new firmware. the biggest difference is you have to turn up the gain to about midway to use it. i left new update in mine. a few have asked to go back and i emailed it to them.
I don’t think you will regret it, I sure haven’t.
the sensitivity on my lx7 was enhanced after the install of the 5.1 Imo each of the three updates i've installed did have improvements on what was offered. one of the reasons why i bought it. and a shout out to 3300 for offering his advice and help on the issues people have with their electronics.
It’s like a gear splitter in a transmission. The old sensitivity was often too low on one setting and too high with one more push of the button.
That’s a good way to describe it. The latest update really smoothed out the gain/sensitivity curve quite a bit. Now and 4 then a gradual jump between 4 and 8 only to have a big jump from 8 to 9. (Just using those numbers to illustrate my point a bit better. I can’t recall where the stupidly big jumps were but they were in there.)
The gradual gain jumps you describe, is that occurring with the 5.1 firmware upgrade?
Yes...they are more gradual with 5.1....so it is more even through out the entire range whereas in the past it would be a bit steep between two numbers, then level out, then a steep jump again. The improvements to the gain curve are reason enough to upgrade to 5.1
You need a USB 2.0 cable found on their website:https://shop.marcumtech.com/product/usb-digital-upgrade-cable-lx-6-lx-6s-and-lx-7/