Pages: [1] |   Go Down

Author Topic: Rod Building question  (Read 489 times)

Offline SALMONEMIA

  • Team IceShanty Maniac
  • **
  • Posts: 3,641
Rod Building question
« on: Aug 21, 2017, 05:45 PM »
http://www.jannsnetcraft.com/ice-rod-parts/netcraft-xts-ice-rod-handle-kit.aspx

Does anyone on here build there own rods? Im looking at this handle, curious if the bottom end screws off so a spinning reel can be inserted then tightened over that? Not sure as Ive never built or customized rods before. Thanks
Logged
Salmonemia

Offline rdhammah

  • Team IceShanty Maniac
  • **
  • Posts: 4,068
Re: Rod Building question
« Reply #1 on: Aug 22, 2017, 09:16 AM »
I would assume that the top is what screw off to attach the reel. email  Jann's or call and ask for their rod building dept. I have called and they are very helpful.
Logged

Offline midwest_rodworks

  • Team IceShanty Regular
  • ***
  • Posts: 125
Re: Rod Building question
« Reply #2 on: Aug 22, 2017, 09:26 AM »
The top 1/3 of that will unscrew and be the lock nut on your reel seat.
Logged
"Balance in all things"

Offline SALMONEMIA

  • Team IceShanty Maniac
  • **
  • Posts: 3,641
Re: Rod Building question
« Reply #3 on: Aug 23, 2017, 12:49 PM »
Thank you both.  I called but was closed im impatient lol
Logged
Salmonemia
Pages: [1] |   Go Up
 


Iceshanty | MyFishFinder | MyHuntingForum
Contact | Disclaimer | Privacypolicy | Sponsor
© 1996- Iceshanty.com
All Rights Reserved.