Fly the Team Iceshanty Flag! Iceshanty Proshop
Went out on the ice today and drilled a few holes to show the K Drill in action. 4 more arriving tomorrow at $239.99 each. Click the link to see the video.
Looks like there is too much torque.
The drill "Fuel" is a beast and I should adjust the torque, which I don't know how to do so well. The video from the company says to lift up a little. In the video I was drilling right next to the other hole, partially in the other hole, so making about a 14" hole or so. I'm still learning as well, as I got it put together the middle of last year.
Is it a 6" or 8" auger?
Have you tried the K-drill and Fuel without the Clam plate? Does the Clam plate add all that much (other than weight)?Also, the Clam plate trigger flops around a lot. Any ideas on how to stiffen it up? (and don't say give it some Viagra).MD
Why did it look like it had trouble going through the bottom and it appeared to bind up each time.
Read what jiggenfrogs wrote. I was trying to show that you could cut another hole connected to the existing hole. I think I could do a better job if I had lifted up a little. I've had no trouble drilling holes. Even my propane 10" propane Eskimo will jam up when breaking through. I need to practice my technique.
I drill 6 holes in my shack to make one big hole. I find it is easier to drill just outside the other hole so the blades have ice to "chew" on and keep the auger drilling. If the holes are connected then the blades will catch...I chip out the sections with a chisel to make the hole complete. Just what I have found works for me.
Thanks for posting, that thing looks sweet. Does it have a hand crank option? What happens when you run out of juice?
I got the 8" setup with the fuel drill. I was using it up in Northern Maine last week. Cuts fast and easy. I did not get the clam plate and don't really see any reason to get it. I wasn't ever overpowered by the torque of the drill with the handle on it, but I imagine it would make holding on to it a little easier, and being able to set it down on the ice without getting the drill in the snow would be nice. 20" of ice and cut 10 holes without any issues. The only thing I ran into was if it is really cold, like it was, I like 10" holes better. The 8" ones freeze in pretty quick when it is -15 and windy. For any other conditions the 8" drill would be perfect. My goodness it is nice carrying around 10 pounds of drill.