been playing with the idea of a portable take apart with allen key screws ice shack so it would be about 36 inch by 72 inch and about 60 inch tall about 8 sections you assemble on the ice... floor would be ply-wood, sides LuAnn or a little thinker ply type wood with foam insulation like pink or green board foam all self contained... so I can either assemble it on the ice or disassemble it to fit in the car to get it home at end of year.. most of the frame will be made with 2x2 furing strips planning to assemble it together with hurricane nuts in the wood and just slide the screws with washer in and tighten it all up with a allen wrench's or even the chuck of a drill with a allen key in it... might save time and space when storing for summer... but just worried we will not have good ice so I set the plans aside for now... not sure how light it would be like if using luann and furring strips would be to light and make it a kite on the ice or a giant dangerous tumble weed if not in it... will see only time will tell if I decide to build it....