Auger blade sharpening

[bowhtr]

I have done a search for Auger sharpening and listed several sites below.  I'm sure there are more I haven't listed but my question is have any of you shanty members used any of these services or any others you would like to mention?  I'm looking for a good and bad reviews.  I have several sets of lazar mag blades needing some attention.

https://www.redrockstore.com/index.php/ice-augers/ice-auger-blade-sharpaening-service
http://www.iceaugersharpening.com/what-we-do.html
http://www.iceaugers.com/
http://www.angelfire.com/biz7/iceaugersharpening/

Thanks   

[FishingFinAddict]

I haven't done it personally but a friend used the redrockstore website and he said he was happy with their service. He said the customer service was great and he would recommend it. Hope this helps!

[bowhtr]

bump

[3300]

sponsor and great reviews and exchange service.

http://www.fish307.com/

[iceguy]

Great job and quick turn around...............

For Nils Master Cutting Head Sharpening Service contact:

Frank Deluca
5382 Jentoft Rd.
Saginaw,  MN   55779
218-729-7941

[email protected]

[bobberbill]

http://www.anglerspointmarina.com/Ice_Auger_Services.php

They take care of everyone on Lk. St. Clair..

[jackpine]

Facebook

ice auger sharpening

[sureman666]

have had luck using a cut off abrasive disc on a 4 1/2 small angle grinder..

[FISHN NIK]

Check the  "Sharpening 8" Mora ice auger blades post,it will enlighten you.I know it opened my eyes.


                    FN

[lefty2053]

have had luck using a cut off abrasive disc on a 4 1/2 small angle grinder..

Doesn't that take a lot off each time? I use a magic marker and then go over it with a stone or Diamond file and take off just the black from the marker. Sharpens the blades great.

[sureman666]

using the cutoff wheel does take off more material than most other ways but its definitely a quick easy fix and should last most of a season..using an extra fine tip sharpie along the blade edge is a good idea though..

[after-4]

Go to DULE BLADES SUCK  site. It is $10 plus 2.95  shipping to sharpen a set of my blades. The turn around is guaranteed 3 days. Send my Mora and Strike Master blades there at years end. I like to start off with 2 sets have  just incase some thing happens unexpectedly.

[bowhtr]

Those that have posted how are your blades after they sharpened them? are they like new ones?

[lefty2053]

When I sharpen mine they work just like new ones.

[oneironabe]

i have always replaced the blades on my 8inch mora.  saw a hand held sharpener on utube and wondered if anyone else has used it with any luck

[mjgonehunting]

I touch up my Mora blades with a diamond hone,but a good sharpening with the proper jigs to guide you can't be beat!
I have a Locksmith/bait/gunsmith shop near me that does them.

[rickgehrke]

For NILS use Frank. He is awesome.