Ice Fishing Shanty
Home | ThinIce | Chat | Pictures | Archives | ProShop | GearShop | Militia | Sponsors
The Iceshanty.com Shanty Tips Board is sponsored by
Clam Corp
At Clam We Go Fishing With You
Sep 10, 2010, 02:56 AM
MyFishFinder.com
Iceshanty's open water sister site. Click here to register
Welcome, Guest. Please Login or Register.
Miss activation email? | Forgot password?
+  IceShanty.com's Ice Fishing Community
|-+  Ice Fishing Tips -Check your local regulations!
| |-+  Ice Shack Tips (Moderator: baginwal)
| | |-+  Drop-Down Wheelhouse - Help!?
Pages: [1] Print
Author Topic: Drop-Down Wheelhouse - Help!?  (Read 491 times)
TIBS
Team IceShanty Regular
***
Posts: 437


Beaver Dam's were made for 10" holes.


« on: Mar 06, 2010, 11:31 AM »

Too all of those who love to tinker and have gears spinning in their heads constantly.....

I am trying to figure out how to build a drop-down wheelhouse on the cheap, and not drop a thousand dollars into the frame alone.....
(trying to get into sturgeon spearing, but my current shack is too high off the ice to spear)

I need to pull it about 40 miles to the sturgeon spearing grounds.  Suspension required or could I just weld spindles direct?

I've seen a bunch of guys build a shack and have an exterior frame that flips up to set the shack down on the ice, but looking at the addresses on the doors they're all local, so don't know how far those can travel.

I also seen a setup similar to the zack shack but with no suspension, again local so no distance to travel.  For those who have a wheelhouse with no suspension and travel a bit with it, please post some picutures to get my gears turning, I'm lost on this one.

Logged

svonasek
IceShanty Rookie
**
Posts: 36


« Reply #1 on: Jun 20, 2010, 09:32 PM »

My buddy had to tow a drop down with now suspension.  That thing bounced all over the road.  I would never recommend not using springs.  You can pick up a pair of leaf springs for under $100.  Well worth it
Logged
Sven936
Team IceShanty Addict
*
Posts: 514



« Reply #2 on: Jun 21, 2010, 09:57 AM »

You could try the torsion half axles.  Get a pair for 950lbs load rating for around $190.   They do go higher.
Logged

TIBS
Team IceShanty Regular
***
Posts: 437


Beaver Dam's were made for 10" holes.


« Reply #3 on: Jun 21, 2010, 04:38 PM »

You could try the torsion half axles.  Get a pair for 950lbs load rating for around $190.   They do go higher.

Would those work mounting direct to the frame rails?  Looks to me like they need at least 7" of something to bolt or weld to, which I won't have with a drop down frame.
Logged

Sven936
Team IceShanty Addict
*
Posts: 514



« Reply #4 on: Jun 21, 2010, 04:55 PM »

I am not sure. I have been contemplating a drop down design using these, but haven't got it quite figured out myself.  Depends if you can keep the rails from twisting I suppose.  Beefy enough.

Logged

mricefish
IceShanty Rookie
**
Posts: 88


« Reply #5 on: Jun 27, 2010, 10:28 AM »

I would say they are a must no matter how far you travel to fish.  I have one shack with I built with out springs on it.  Going to change that sometime this summer before i use it for next year.  I would only build one with leaf springs on the wheels, otherwise it just bounces way too much.   With springs it will also pull better across the lake, again just takes  the bounce out.  things inside will also stay put better if you use springs, just a much smoother ride, well worth the money.  I would add them right away would of been much easier than what i will end up dong, adding them latter. 
Logged
Pages: [1] Print 
Jump to:  
IceShanty Forum Powered by SMF 1.1.11 | SMF © 2006-2007, Simple Machines LLC


Home | ThinIce | Chat | Pictures | Archives | ProShop | GearShop | Militia | Sponsors

Ice Fishing Iceshanty.com Established 1996
Ice Fishing @ www.iceshanty.com Fishing @ www.myfishfinder.com Hunting @ www.myhuntingforum.com

Contact | Sponsor IceShanty.com | Disclaimer
©1996- IceShanty.com
All Rights Reserved
RSS feed for this boards last ten postsRSS ?